Beal Sling - 120cm x 16mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Beal Sling 120cm x 16mm is a fundamental piece of climbing hardware designed for climbers who prioritize reliability and versatility in their gear. Ideal for both alpine and traditional climbing, this nylon sling excels at building two-bolt anchors, extending quickdraws to reduce rope drag, and creating secure belay stations. While its robust construction ensures long-term durability, users should be aware that, like all nylon climbing gear, it requires regular inspection for wear and protection from UV degradation and chemical exposure to maintain maximum integrity.
All features
| Material | Nylon |
|---|---|
| Model Part Number | 001252745 |
| Brand | Beal |
Extended Product Information
FAQs
Can I use this sling for climbing falls?
Yes, this sling is rated for climbing use and can handle the dynamic forces of falls when used correctly within a redundant anchor system.
How often should I replace this nylon sling?
It depends on usage. If used daily, inspect it every few weeks. If kept clean and stored properly, it can last several years, but manufacturers typically recommend replacing soft goods every 5-10 years regardless of use.
Is 120cm the length when doubled or the total circumference?
The 120cm measurement refers to the total length of the loop (the circumference).
Does this sling stretch?
Nylon has a small amount of dynamic stretch, which is beneficial for absorbing some energy in an anchor system compared to static cordage.
Can I leave this sling at the crag for rappelling?
It is not recommended to leave webbing behind as a permanent 'tat' anchor unless it is an emergency, as it will be subject to constant UV exposure and moisture.
Troubleshooting
Sling feels stiff or 'crunchy' after use
This is often due to dirt or salt buildup. Rinse thoroughly with fresh water and air dry.
Visible fraying or discoloration on the webbing
If the sheath shows significant wear, fraying, or chemical discoloration, immediately retire the sling.
Pros and Cons
Pros
- Extremely durable and wear-resistant nylon
- Versatile length for various anchor configurations
- Lightweight and easy to carry doubled over the shoulder
- Excellent knot security
- Highly reliable for critical climbing systems
Cons
- Nylon can absorb moisture and become stiff in freezing conditions
- Requires more frequent inspection compared to Dyneema alternatives
- Heavier than ultra-lightweight high-modulus polyethylene slings
Setup, Compatibility & Care
Setup
To use as an anchor, identify the two primary protection points. Clip one end of the sling to each point, then pull a segment of the sling between the two points downward to create a 'V' shape. Tie an overhand or figure-eight knot in the 'V' to create a master point for your carabiners. Always ensure the angle of the master point is less than 60 degrees to minimize load force on the anchor points.
Compatibility
This sling is compatible with all standard climbing carabiners. Ensure that any carabiner used with the sling is free of sharp burrs that could damage the nylon webbing.
Care
Clean the sling by rinsing it with fresh, lukewarm water to remove dirt and grit that can act as an abrasive. Air dry away from direct sunlight, as UV radiation degrades nylon fibers over time. Store in a cool, dry place away from chemicals, specifically acids or bleaching agents, which can weaken the material instantly.