Priory Scaffold Spanner - Bi-Hex 7/16W Flat Handle

The socket is designed for 7/16 Whitworth (7/16W) nuts and bolts.

No, this spanner is specifically for Whitworth fittings and is not compatible with metric bolt sizes.

The handle is made of stainless steel, and the socket is designed for Whitworth fittings.

The spanner is 205mm (8 inches) in length.

Yes, a Bi-Hex socket provides a more secure grip on the fastener, reducing the risk of slippage and damage to the nut or bolt head.

Clean with a dry or damp cloth after use and store in a dry place. Avoid abrasive cleaners.

Please refer to the product packaging or the retailer's website for specific warranty information, as it can vary.

Ensure the spanner is fully seated on the nut. Verify that the nut is indeed a 7/16W Whitworth size and not damaged or rounded. Clean both the spanner socket and the nut of any grease or debris.

Ensure you are using the correct orientation of the spanner for leverage. Check for obstructions around the nut. For very tight nuts, a short, sharp force might be more effective than sustained pressure.

Inspect the connection point between the handle and the socket. If it appears loose, cease use and contact the manufacturer or retailer. Do not attempt to tighten or modify the handle yourself.