Polyvine Classic Colour Acrylic Scumble - 2L
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Polyvine Classic Colour Acrylic Scumble is for DIY enthusiasts and professional decorators looking to create unique, semi-transparent colored paint effects on various surfaces. Its key benefit is the ability to transform ordinary emulsion or latex paints into decorative finishes with excellent water and wear resistance when properly sealed. A potential caveat is the 48-hour curing time required before applying a protective varnish for maximum durability.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | 729870000100 |
| Brand | Polyvine |
Extended Product Information
FAQs
Can I use this with gloss paint?
No, this product is designed to be mixed with satin or matt emulsion/latex paints. Using it with gloss paint may lead to poor adhesion and an unsatisfactory finish.
How long does it take to dry?
The scumble itself dries to a translucent finish relatively quickly, but it requires a minimum of 48 hours before you can apply a protective varnish for optimal water and wear resistance.
What is the best way to achieve a uniform color?
Thoroughly mix the scumble with your chosen paint before application. Apply the mixture evenly using a brush, roller, or other suitable tool, working in consistent strokes or patterns.
Can I use this on surfaces other than walls?
While primarily intended for walls, it can be used on other prepared surfaces suitable for emulsion paint, provided they are properly primed and sealed afterward for durability.
How do I clean up after using the scumble?
Clean your tools and any spills immediately after use with water. Once the product is dry, it becomes more difficult to remove.
What is the working time of the product?
You have approximately one hour of working time once the scumble is mixed with the paint, allowing for careful application and blending of effects.
Troubleshooting
Uneven color application
Ensure thorough mixing of the scumble and paint. Use a consistent application technique, such as a brush or roller, and work in manageable sections. Practice on a test surface first.
Streaking or brush marks are too prominent
Apply a thin coat and consider feathering the edges. Use a good quality brush or roller and reduce the amount of product loaded onto the tool. A slightly damp brush can sometimes help blend marks.
The finish feels tacky after drying
This may indicate insufficient drying time before varnishing or a very thick application. Allow more time for the scumble to dry completely (at least 48 hours before varnishing). Ensure the varnish is applied thinly and evenly.
Pros and Cons
Pros
- Enables creative, custom paint effects.
- Enhances durability of standard emulsion paints when varnished.
- Offers a good working time for application.
- Creates a professional-looking translucent finish.
- Suitable for use with common emulsion and latex paints.
Cons
- Requires a separate varnish for full water and wear resistance.
- Drying and curing times need to be considered.
- Achieving an even finish may require practice.
Setup, Compatibility & Care
Setup:
- Ensure your base paint (satin or matt emulsion/latex) is clean, dry, and free from dust.
- Mix the desired ratio of Polyvine Classic Colour Acrylic Scumble with your chosen paint. Start with a small test batch.
- Stir thoroughly to achieve a uniform color and consistency.
Compatibility:
- Compatible with satin and matt emulsion/latex paints.
- For maximum water and wear resistance, it must be protected with Polyvine Decorators Varnish (gloss, satin, or dead flat) after a minimum of 48 hours.
Care:
- Clean application tools immediately after use with water.
- Once the varnish is fully cured, surfaces can be wiped clean with a damp cloth. Avoid abrasive cleaners.