Xilence M.2 SSD Cooler - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Xilence M2SSD.B.ARGB cooler is designed for PC builders and gamers who require enhanced cooling for their M.2 2280 SSDs, especially during demanding tasks like gaming and streaming. Its key benefit is efficient passive heat dissipation, preventing performance throttling and potential SSD damage, with a caveat that ARGB lighting requires a compatible 3PIN 5V header. This cooler offers a sleek black design and easy assembly for seamless integration into most PC builds.
All features
| Colour | Black |
|---|---|
| Model Part Number | XC401 |
| Brand | Xilence |
Extended Product Information
FAQs
What is the primary function of the Xilence M2SSD.B.ARGB cooler?
Its primary function is to dissipate heat generated by M.2 2280 SSDs, preventing performance degradation and potential damage during intensive use.
Do I need additional fans for this cooler to work?
No, this cooler uses a passive design with a heatsink and thermally conductive materials; no additional fans are required for its core cooling function.
How do I connect the ARGB lighting?
You connect the included 3PIN ARGB cable to a compatible 5V ARGB header on your motherboard. This allows for customizable lighting effects synchronized with other ARGB components.
Is this cooler compatible with all M.2 SSDs?
It is specifically designed for the M.2 2280 form factor and supports both PCIe NVMe and SATA interfaces. It is not compatible with other M.2 lengths (e.g., 2242, 2260, 22110).
What is included in the package?
The package typically includes the heatsink, base plate, mounting kit with screws, and thermally conductive silicone films.
Can the ARGB lighting be turned off if I don't want it?
While there isn't a dedicated switch to turn off the lighting, you can choose not to connect the ARGB cable if you prefer a non-illuminated setup. If connected, control is managed via motherboard software.
How often should I clean the cooler?
It is recommended to check for dust buildup periodically, especially during general PC maintenance, and clean gently with compressed air or a soft brush.
Troubleshooting
ARGB lighting not working
Verify the 3PIN ARGB cable is securely connected to a compatible 5V ARGB header on your motherboard. Ensure ARGB is enabled in your motherboard's BIOS or control software.
SSD not recognized after installation
Double-check that the M.2 SSD is correctly seated in the slot and that all mounting screws are tightened appropriately. Ensure the ARGB cable does not obstruct the SSD connection.
Cooler seems loose
Ensure all four mounting screws are properly tightened to secure the heatsink assembly to the M.2 SSD. Do not overtighten, as this could damage the SSD.
Overheating concerns persist
Confirm that the thermally conductive silicone films are applied correctly and making good contact between the SSD and the heatsink. Ensure there is adequate airflow within the PC case.
Pros and Cons
Pros
- Effectively reduces M.2 SSD temperatures during intensive use.
- Adds customizable ARGB lighting to PC builds.
- Passive cooling operates silently.
- Simple and quick installation process.
- Compatible with common M.2 2280 NVMe and SATA SSDs.
- Durable build quality for long-term reliability.
Cons
- Requires a compatible 3PIN 5V ARGB header on the motherboard for lighting.
- Passive cooling may be less effective for extremely high-end, continuously loaded SSDs compared to active solutions.
- Only compatible with M.2 2280 form factor drives.
Setup, Compatibility & Care
Setup:
- Ensure your PC is powered off and unplugged.
- Carefully remove your M.2 SSD from its slot.
- Apply the included thermally conductive silicone films to both sides of the M.2 SSD.
- Place the M.2 SSD between the heatsink and the base plate, aligning the screw holes.
- Secure the SSD using the provided screws and mounting kit.
- Connect the 3PIN ARGB cable to a compatible 5V ARGB header on your motherboard.
- Reinstall the M.2 SSD into its slot and power on your PC.
Compatibility:
- Form Factor: M.2 2280
- Interface: PCIe NVMe and SATA
- Lighting: Requires a 3PIN ARGB 5V header on the motherboard.
Care:
- Periodically check for dust buildup on the heatsink and gently clean with a soft brush or compressed air.
- Ensure the ARGB cable remains securely connected.
- Avoid using abrasive cleaners or solvents.