201-Piece Tile Leveling System - GTV

A tile leveling system, like the GTV 201-piece set, is used to ensure that adjacent tiles are installed at the same height, preventing unevenness or 'lippage' and creating a perfectly flat surface.

The clip thickness corresponds to the desired grout width. Choose a clip thickness that matches your project's aesthetic requirement for grout line size.

Yes, the included crimping pliers are designed to be reusable. They are made from durable materials for long-term use across multiple tiling projects.

Absolutely. This system is suitable for both floor and wall tile installations, helping to maintain alignment and levelness during the adhesive curing process.

The 201-piece set includes a combination of high-strength clips, durable wedges, and reusable crimping pliers. Specific counts for clips and wedges are not detailed but are sufficient for a comprehensive tiling job.

Once the tile adhesive has fully cured, the plastic clips are typically broken off by kicking them or tapping them with a rubber mallet. The plastic bases are then removed from under the tiles.

This system automates and simplifies the process of achieving level tiles, reducing guesswork, saving time, and leading to a more professional and consistent finish compared to methods relying solely on shims or manual adjustments.

Ensure the clip is fully inserted under the tile edge and not obstructed by adhesive. Try a different angle with the pliers or slightly adjust the tile position.

Verify that you are not over-tightening. The pliers should provide enough tension to level the tiles; excessive force can break the clips. Ensure clips are not damaged before use.

Check that clips are consistently placed under all adjacent tile edges. Ensure the substrate is level before tiling begins, and that adhesive is applied evenly.

If the break-off point is too high, you may need to use a utility knife to score the plastic base before attempting to remove it. Ensure you are breaking off the clip head correctly.