Electric Standing Desk - VASAGLE

Please refer to the product manual for the exact weight capacity. It's important not to exceed this limit to ensure stable operation and longevity.

To set a preset, adjust the desk to your desired height, then press the 'M' or 'S' button followed by the number key (1-4) you wish to assign it to. The display will confirm the preset is saved.

The desk offers a range of height adjustments suitable for both sitting and standing. Refer to the product specifications for the precise minimum and maximum height measurements.

The USB-C port is primarily designed for device charging. Data transfer capabilities may vary and are not guaranteed.

To reset the desk's memory, typically you need to lower the desk to its lowest position and hold the down button for a few seconds until the display shows 'RST' or flashes. Consult your manual for the exact reset procedure.

The storage pocket is typically attached to a specific side of the desk and is not designed to be repositioned.

Warranty information can be found in the product manual or on the manufacturer's website. Typically, electric standing desks come with a limited warranty covering the frame and electronic components.

Check that all cables are securely connected to the control box and the motor. Ensure the desk is plugged into a working power outlet. Perform a reset procedure as per the manual (usually involves lowering the desk to its lowest position and holding a button).

Verify that the desk is on a level surface. Ensure all screws in the frame and desktop attachment are fully tightened. Check that the weight is evenly distributed on the desktop.

Consult the product manual for specific error code meanings. Common solutions involve resetting the desk or checking for obstructions.

Confirm the desk is powered on. Try a different compatible USB-C cable and device to rule out cable or device issues. Ensure the desk's power adapter is correctly connected.