Gloss Varnish - White

Apply thin, even coats using a brush. Allow each coat to dry completely before applying the next.

This varnish is suitable for various surfaces, including canvas, paper, and wood.

Yes, the varnish is made with a non-toxic formula.

Clean brushes immediately after use with appropriate solvents (e.g., water for water-based varnishes).

Store the varnish in a cool, dry place, away from direct sunlight, and keep the container tightly sealed when not in use.

Apply as many coats as needed to get the desired gloss and protection. Two or three thin coats are usually sufficient, but always follow the manufacturer's directions.

If the varnish is too thick, you can try thinning it slightly with a recommended thinner appropriate for the varnish type. Be sure to check manufacturer's instructions.

Ensure proper ventilation during application. Apply thin, even coats and avoid excessive humidity. It might require an extra coat.

Use a high-quality brush and apply thin, even coats. Allow the varnish to self-level. You can also try lightly sanding between coats with fine-grit sandpaper.

Check the room temperature and humidity. Ensure the surface is clean and the varnish is not expired. Inconsistent drying can also be a result of applying too thick of a coat.