Best current price£21.54from eBay
Shopping.co.uk recommended and popular offers
eBay£21.54Visit shop Laser Tools Non-Conductive Insulated Magnetic 1/4"" Hex Bit Driver 9152
Visit shop3 offers from £21.54 - £24.53
View price history by clicking the chart icon.
This Laser Tools 9152 Non-Conductive Insulated Magnetic 1/4" Hex Bit Driver is designed for electricians and technicians working near live electrical circuits, allowing the safe use of standard hex bits with a drill driver or cordless screwdriver while providing crucial insulation. Its primary benefit is enhanced safety when working with voltages up to 1000V AC / 1500V DC. A caveat to consider is its maximum torque limitation of 40Nm, which may not be suitable for heavy-duty fastening tasks.
| Model Part Number | 9152 |
|---|---|
| Brand | Laser |
The primary safety feature is its non-conductive insulation, manufactured to IEC60900 standards, which protects the user from electric shock when working near live voltages up to 1000V AC / 1500V DC.
Yes, it is designed to accept any standard 1/4" hex shank screwdriver bit.
The maximum torque rating for this insulated bit driver is 40Nm.
It is primarily designed for electrical work and lighter mechanical tasks. The 40Nm torque limit may not be sufficient for demanding construction applications requiring higher torque.
Clean the tool with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the magnetic tip is free of metal debris.
Inspect the tool regularly for any cracks, cuts, or signs of wear on the plastic insulation. If any damage is observed, the tool is no longer safe to use for its intended purpose.
While it accepts a 1/4" hex shank, the 40Nm torque limit and insulated design suggest it's best suited for use with standard drill drivers or cordless screwdrivers, not high-torque impact wrenches, to avoid damaging the tool or compromising safety.
Ensure the bit is fully inserted into the holder and that the magnet is clean. Check for any debris in the bit holder mechanism.
Verify that the drill chuck is compatible with 1/4" hex shanks and is properly tightened. Ensure no debris is present in the drill's chuck.
Clean the magnetic tip with a soft cloth to remove any metal filings or debris that might be interfering with its magnetic strength.
Immediately stop using the tool and replace it. Using damaged insulated tools poses a serious safety risk.
Setup:
Compatibility:
Care:
