HPE Internal Solid State Drive - 480GB SSD SATA 2.5 inch SFF
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The HPE MK000480GWUGF 480GB Solid State Drive is designed for IT professionals and system administrators needing reliable, high-speed storage for server and workstation environments. This drive provides an efficient boost to data processing tasks thanks to its fast SATA interface and compact 2.5-inch form factor, though users should ensure their existing drive bays support the specific SATA II specification to avoid potential performance bottlenecks.
All features
| Series | Serial A |
|---|---|
| Model Part Number | MK000480GWUGF |
| Brand | HPE |
Extended Product Information
FAQs
Is this drive compatible with all HPE servers?
This drive is compatible with most systems supporting 2.5-inch SATA interfaces, but you should verify your specific server model's technical specifications for drive compatibility.
Can I use this in a desktop PC?
Yes, as long as your desktop motherboard has an available SATA port and you have a 2.5-inch mounting bracket, it will function like a standard SSD.
Does this drive support hot-swapping?
Hot-swapping depends on your server's backplane and RAID controller configuration, not just the drive itself. Consult your server manual.
What is the primary benefit of the SFF design?
The Small Form Factor (SFF) allows for higher component density within a server chassis, improving airflow and allowing more drives to be installed in the same space.
Is this drive suitable for heavy write-intensive tasks?
While it is a reliable SSD, for extremely heavy write-intensive enterprise workloads, you may want to compare it against HPE's 'Mixed Use' or 'Write Intensive' series drives.
Troubleshooting
Drive not detected by the server BIOS or OS.
Verify that the SATA cable is securely connected to both the drive and the motherboard/backplane. Check BIOS settings to ensure the SATA port is enabled.
Drive shows slower than expected transfer speeds.
Check if the drive is connected to a SATA II or SATA III port and verify if any legacy drivers are limiting the bus speed.
Physical fitment issues in drive bay.
Confirm that your drive cage supports the 2.5-inch form factor. You may need an adapter bracket if the bay is designed for larger 3.5-inch drives.
Pros and Cons
Pros
- Reliable performance for enterprise-level applications
- Compact 2.5-inch design saves internal server space
- Easy to integrate into existing SATA-based hardware architectures
- Solid construction quality from a trusted server component brand
Cons
- SATA II interface may be slower than newer SAS or NVMe standards
- Capacity limited to 480GB, which may not suit massive data storage needs
- Primarily designed for server hardware, requiring specific mounting trays
Setup, Compatibility & Care
To install this drive, ensure your server or workstation is powered down and disconnected from the power source. Insert the 2.5-inch drive into a compatible drive carrier or tray, ensuring the SATA interface pins are properly aligned with the backplane or cable connector. Once seated, secure the drive with the appropriate screws.
Care instructions involve avoiding exposure to static electricity during handling, ensuring the server environment maintains adequate ventilation to prevent overheating, and keeping the drive firmware updated if HPE provides specific patches for your server model. Always verify your server's backplane documentation to ensure compatibility with SATA II connection standards.