Climaflex Pipe Insulation - Bore 22mm - Wall 19mm - Length 2m

The thermal conductivity varies with temperature: 0.034 W/mK at 0°C, 0.036 W/mK at 20°C, and 0.039 W/mK at 40°C.

This insulation is designed for pipes with a 22mm bore. You should confirm your pipe's outer diameter to ensure a proper fit.

Yes, it has a Class P fire rating.

Yes, the product is totally CFC and HCFC free.

While it provides thermal protection, long-term outdoor exposure, especially to direct sunlight, may degrade the material. It is best suited for indoor or protected outdoor applications.

Cut pieces to length and butt them together. Seal all seams and joints securely with appropriate insulation tape or adhesive to create a continuous barrier.

The wall thickness is 19mm.

Ensure the insulation is fully sealed at all seams and joints. Check if the insulation wall thickness is adequate for the ambient humidity and pipe temperature. Consider adding an additional layer or using a vapor barrier tape.

Verify that the pipe's outer diameter matches the internal bore of the insulation. Ensure the pipe is not obstructed. Lightly lubricating the pipe or insulation slit with mild soap and water can sometimes help, but ensure it dries thoroughly.

Use a sharp, high-quality blade for cutting. Score the material first before making the full cut. Ensure the insulation is laid flat on a stable surface for cutting.

Ensure the surfaces being taped are clean and dry. Use high-quality insulation tape specifically designed for this purpose and apply firm pressure.