SLX Audio Cable - Gold

Gold plating enhances signal conductivity and prevents corrosion, leading to a more stable and clearer audio transmission over time compared to standard connectors.

This cable is designed for stereo audio output (like from a smartphone or tablet) to audio system inputs. It is not designed for microphone input.

It means one end has a single 3.5mm stereo connector (like a headphone plug), and the other end splits into two RCA connectors, typically labeled red for the right channel and white for the left channel.

The 1.5m length is suitable for most standard desk or shelf setups. For very large rooms or complex audio configurations where components are far apart, a longer cable might be necessary.

The cable ensures a clean signal transmission, which helps maintain the audio quality produced by your source device and audio system. It won't inherently improve the quality of the audio source itself but prevents signal degradation.

Use a clean, dry, soft cloth to gently wipe the gold-plated connectors. Avoid using liquids or abrasive materials, which could damage the plating or the connection.

Ensure all cable connections are secure at both the source device and the audio system. Check that the correct input is selected on your audio system. Try cleaning the connectors with a dry cloth.

Verify that the red and white Phono plugs are inserted into the correct corresponding input jacks on your audio system. Test the cable with a different source device or audio system to isolate the issue.

This could be due to interference. Ensure the cable is not running directly alongside power cords. Try moving the audio equipment or the cable to a different location. Ensure all devices are properly grounded.