Flex Power Tools Angle Grinder - 18V Bare Unit - 125mm

This product is sold as a bare unit, meaning it includes the angle grinder body only. Batteries and a charger are not included and must be purchased separately.

It uses the FLEX 18V battery system. It is compatible with all FLEX 18V battery packs.

The Anti-Kickback feature is a safety mechanism that automatically shuts down the motor if the disc gets jammed or blocked in the material, helping to prevent dangerous kickback.

While primarily highlighted for its cutting speed, with the appropriate disc, this angle grinder can also be used for grinding applications. Always ensure you use the correct disc for the task and follow safety guidelines.

Engage the spindle lock button to hold the spindle, then use the appropriate wrench to loosen and remove the flange nut. Remove the old disc, place the new disc onto the spindle, secure it with the flange and nut, and tighten firmly while holding the spindle lock.

Please refer to the official Flex Power Tools warranty documentation for the specific warranty period applicable to this model. Warranty terms can vary.

The maximum disc diameter supported by this angle grinder is 125mm (or approximately 5 inches).

Ensure a fully charged FLEX 18V battery is correctly inserted. Check battery contacts for dirt or damage. Try a different compatible battery.

This could be due to overload protection or the Anti-Kickback feature. Release the trigger, check for disc binding or obstruction, clear any obstructions, and restart. If the issue persists, the overload protection may have been triggered, requiring a brief cool-down period.

Check if the battery charge is low and replace/recharge if necessary. Ensure the correct type of disc for the material is being used and that it is not excessively worn. Clean any dust from ventilation openings.

Verify the disc is correctly mounted and balanced. Ensure the disc is not damaged or warped. Check if the side handle is securely attached.