Best current price£59.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£59.99Visit shop Zipbolt Clear Ultimate Fixing Kit For Solid Compact Laminate Worktops
Visit shop2 offers from £59.99 - £71.42
View price history by clicking the chart icon.
The Zipbolt Ultimate Compact Fixing Kit is designed for professional installers and dedicated DIY enthusiasts working specifically with solid compact laminate worktops. Its primary benefit is providing a robust, all-in-one system for achieving clean, flush, and high-tension joints in dense materials where traditional fixings often fail, though users should note that the fast-setting epoxy requires quick, precise application to ensure optimal results.
| Model Part Number | QTSCL18.100UFKIT |
|---|---|
| Brand | Zipbolt |
This kit is specifically engineered for solid compact laminate worktops, which have different density and mounting requirements than standard timber.
The connectors are designed for permanent installation once the epoxy has cured, so they are not intended for reuse.
While the epoxy sets in 5 minutes, it is recommended to wait until the adhesive has fully cured according to the package instructions before applying heavy weight to the joint.
You can use a high-percentage isopropyl alcohol with a clean microfiber cloth to ensure the joint surfaces are free of contaminants.
No, the kit provides the driver bit and installation hardware, but you must provide your own power drill or impact driver.
Verify that the brass inserts are fully seated and that the connector is properly hooked into the housing.
Work in smaller sections or prepare your alignment tools before applying the resin to the joint surfaces.
Ensure you are using the specific Zipblades provided and maintain a steady, consistent feed rate through the material.
To begin installation, ensure the worktop edges are squared and clean. Use the alcohol wipes provided to remove any dust or oils from the joint faces, as these can interfere with the Zipbond epoxy. Insert the brass inserts into the pre-drilled holes, then position the Zipbolt connectors. Apply the epoxy evenly before drawing the joint together with the driver bit. Once the joint is secure, use the included sanding discs and pads to smooth any excess material. Keep the kit in a cool, dry place to prevent the epoxy from prematurely degrading, and always cap the adhesive immediately after use.
