Pressure Sensitive Russ Strip - 152mm

The Pressure Sensitive RUSS (Reinforced Universal Secure Strip) is designed to control membrane mo...

Best current price£15.35from Professional Building Supplies

All Offers

2 offers from £15.35

View price history by clicking the chart icon.

Professional Building SuppliesClassicbond Epdm Pressure Sensitive Russ Strip - 152Mm (Per Metre)
Free delivery in 1–3 days
£15.35
Visit shop
PVC Cladding UKClassicbond Epdm Pressure Sensitive Russ Strip - 152Mm (Per Metre)
Free delivery in 1–3 days
£15.35
Visit shop

Product Information

Full details

The ClassicBond Pressure Sensitive Reinforced Universal Secure Strip (RUSS) is designed for professional roofers and experienced DIY enthusiasts installing EPDM roofing systems. Its primary benefit is providing a reliable base tie-in to control membrane movement, preventing the natural contraction of non-reinforced EPDM towards the center of the roof. A critical caveat for users is that the strip will not function correctly without the specific ClassicBond EPDM Primer, making the use of the correct chemical adhesive essential for a successful installation.

All features

Model Part Number300490
BrandClassicBond EPDM

Extended Product Information

FAQs

Do I need to use primer with this product?

Yes, ClassicBond EPDM Primer is required for the pressure-sensitive adhesive to achieve a proper bond.

Can I use this on reinforced EPDM?

The RUSS strip is specifically designed for non-reinforced EPDM systems where membrane movement is a greater concern.

How wide is the strip?

The strip is 152mm wide.

What is the maximum length I can purchase?

It is sold by the metre, and can be supplied in a single continuous length up to 30.5 metres.

Where should the RUSS strip be installed?

It should be installed at the roof perimeter or at areas where the membrane needs a fixed tie-in point.

Troubleshooting

The strip is not sticking to the EPDM membrane.

Ensure that ClassicBond EPDM Primer was applied and allowed to flash off until tacky before contact.

The membrane is still shifting after installation.

Check that the RUSS strip was mechanically fastened to the roof deck using 50mm Seam Fastening Plates beneath the strip.

Pros and Cons

Pros

  • Prevents long-term membrane shrinkage
  • Easy to apply pressure-sensitive adhesive
  • Provides structural perimeter security
  • Highly durable reinforced material

Cons

  • Requires specific primer for proper adhesion
  • Not suitable for use on EPDM without proper training
  • Must be installed beneath the membrane

Setup, Compatibility & Care

To install the RUSS strip, ensure the roofing substrate is clean, dry, and free of debris. Apply the required ClassicBond EPDM Primer to the back of the EPDM membrane and the surface where the RUSS will be placed. Allow the primer to become tacky before pressing the strip firmly into place. For maximum performance, utilize 50mm Seam Fastening Plates beneath the strip to enhance the mechanical anchor point to the roof deck. Always store the material in a cool, dry place and ensure it is protected from extreme temperature fluctuations before application.

Similar items

Price History

DatePrice
Visit shop