Best current price£66.62from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£66.62Visit shop Rittal Grey Cantilever Shelf 2U, 400mm x 482.6mm
Visit shop3 offers from £66.62 - £99.59
View price history by clicking the chart icon.
The Rittal DK 7119.400 is an essential accessory for IT professionals and data center technicians who require a reliable, static platform for housing non-rack-mountable hardware within a 19-inch enclosure. Providing a robust 25 kg load capacity, this shelf simplifies the organization of networking equipment, monitors, or diagnostic tools; however, users should note that as a fixed-position component, it does not offer sliding access for equipment that requires frequent maintenance or rear-panel adjustments.
| Colour | Grey |
|---|---|
| Model Part Number | 7119.400 |
| Brand | Rittal |
This shelf typically requires standard rack cage nuts and screws which are usually provided with the rack enclosure itself.
While the shelf is 400mm deep, you can support larger equipment as long as the center of gravity remains on the shelf and the load does not exceed 25 kg.
2U refers to the vertical height the shelf occupies in the rack, which is equal to 3.5 inches or 88 mm.
No, this is a fixed-position shelf, meaning it must be mounted at a specific 2U location within the rack.
The shelf is made from sheet steel with a protective spray finish in RAL 7035, which is suitable for standard climate-controlled indoor environments.
Verify that your rack follows the standard 19-inch spacing and that the rack rails are not obstructed by cable management arms or other accessories.
Check that all mounting screws are fully tightened and that the rack rails themselves are securely bolted to the enclosure frame.
The Rittal 7119.400 is compatible with any standard 19-inch rack rail system. To install, align the shelf mounting brackets with the desired 2U rack position and secure using appropriate cage nuts and rack screws. Ensure that the rack rails are properly spaced to accommodate the 483mm width of the shelf. For care and maintenance, wipe the sheet steel surface with a dry or slightly damp non-abrasive cloth. Periodically inspect the mounting screws to ensure they remain tight, especially if the rack is located in an environment prone to high vibration.
