Trust Paxxon Uninterruptible Power Supply - 1 kVA - 600 W
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Trust Paxxon 1000VA UPS is designed for home and office users who need to safeguard sensitive electronics like PCs, routers, and gaming consoles against unexpected power outages and voltage spikes. It provides a reliable bridge during blackouts to ensure data safety, though it is intended for short-term emergency power rather than long-duration off-grid operation.
All features
| Model Part Number | 8713439235043 |
|---|---|
| Brand | Trust |
Extended Product Information
FAQs
How long will the battery last during a blackout?
At half load, you can expect approximately 5 minutes of runtime. At full load, runtime is roughly 45 seconds to 1 minute.
Can I connect gaming consoles to this UPS?
Yes, it is suitable for gaming consoles, routers, and home automation systems as long as the total power draw remains under 600W.
Does the UPS provide surge protection?
Yes, it offers robust protection against power surges, spikes, and over-voltage conditions.
What type of battery does it use?
It uses two internal 12V 7Ah Sealed Lead Acid (VRLA) batteries.
Is the software required to use the UPS?
No, the UPS will provide backup power immediately upon being plugged in, but the software is required for advanced features like automated shutdown.
What is the warranty on connected equipment?
Trust provides an extended warranty on connected equipment up to €20,000, subject to the specific terms and conditions found on the manufacturer's website.
Troubleshooting
UPS is chirping or sounding an alarm
This typically indicates the unit is running on battery power or there is an overload condition. Check your power grid status and ensure the total wattage of connected devices is under 600W.
Computer does not shut down automatically
Verify the USB cable is properly connected to both the UPS and your PC, and ensure the management software is installed and configured correctly.
Unit will not turn on
Verify the power cable is firmly connected to the wall outlet and check if the battery has been adequately charged; if the battery has been depleted, allow it to charge for several hours.
Pros and Cons
Pros
- Protects against both blackouts and power surges
- Automated shutdown software prevents data loss
- Stable sine waveform output
- Easy to integrate with home office or gaming setups
Cons
- Limited backup runtime at high loads
- Requires 8 hours for a full battery recharge
- Large physical footprint compared to standard power strips
Setup, Compatibility & Care
Setting up the Paxxon is straightforward. Connect your devices to the four rear Type F outlets, ensure the unit is plugged into a grounded wall socket, and power it on. To utilize advanced features, plug the included USB cable into your computer and download the monitoring software from the Trust website.
Care Instructions:
- Place the unit in a well-ventilated area, away from direct heat sources to prevent overheating.
- Ensure the total load does not exceed 600 Watts to maintain optimal performance.
- Allow the UPS to charge for the full 8-hour cycle upon initial setup.
- Periodically test the battery by observing the LED indicators during the system self-test to ensure longevity.