Best current price£9.02from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£9.02Visit shop Startech.com Pink 2.5M Slim Cat6 Ethernet Cable. Snagless. 100W Poe. U
Visit shop4 offers from £9.02 - £11.95
View price history by clicking the chart icon.
This 2.5m pink Slim CAT6 Ethernet cable from StarTech.com is designed for IT professionals and network installers who need to maximize space and airflow in high-density network environments. Its key benefit is its significantly reduced diameter compared to standard Cat6 cables, allowing for easier routing and better heat dissipation. A potential caveat is its specific pink color, which might not fit all aesthetic requirements.
| Series | Cat6 |
|---|---|
| Model Part Number | N6PAT250CMPKS |
| Brand | StarTech.com |
The primary advantage is its significantly reduced outer diameter (3.6mm vs. standard Cat6's ~6mm), allowing for better airflow, heat dissipation, and easier routing in high-density network environments.
Yes, this Cat6 cable fully supports 10/100/1000 Mbps Gigabit Ethernet speeds and is backward compatible with older Ethernet standards.
PoE++ (IEEE 802.3bt Type 4) is an advanced standard that allows for higher power delivery, up to 100W. This cable is designed to reliably transmit up to 100W of PoE++ power.
LSZH stands for Low Smoke Zero Halogen. This jacket material emits minimal smoke and no toxic corrosive fumes when exposed to extreme heat or fire, making it safer for installation in poorly ventilated or sensitive areas.
Yes, the cable features snagless connectors that protect the RJ45 clip during installation and use, preventing accidental disconnections or breakage.
The cable uses 28 AWG pure bare copper wire for better conductivity and lower resistance, with stranded conductors for flexibility.
No, this is an Unshielded Twisted Pair (UTP) cable. While the slim design enhances airflow, it offers less protection against electromagnetic interference compared to shielded (STP) cables.
Ensure both ends of the cable are securely plugged into the correct ports. Verify the cable is functioning by testing with a known working cable. Check device network settings.
Confirm the cable is connected to Gigabit Ethernet ports on both ends. Check for physical damage to the cable or connectors. Ensure connected devices support Gigabit speeds.
Verify that the connected switch or injector supports PoE++ (802.3bt Type 4) and can supply at least 100W. Ensure the cable is correctly plugged into both the power source and the device.
Inspect the cable for any signs of damage, kinks, or stressed connectors. Test in a different location to rule out environmental interference. Try a different cable if the issue persists.
Setup:
Compatibility:
Care:
