Kenable Network Ethernet Cable - Red - 25cm

The 25cm length is ideal for reducing cable clutter and managing connections neatly, especially in tight spaces like behind a desk or entertainment center where devices are located very close to the router.

CCA stands for Copper-Clad Aluminium. This means the aluminum wire is coated with a thin layer of copper. It's lighter and less expensive than pure copper but may not offer the same conductivity and performance guarantees, especially over longer distances or at very high speeds.

For short distances like 0.25m, a Cat5e UTP cable like this one can support gigabit speeds. However, the CCA conductor material might not offer the same reliability as pure copper for sustained high-bandwidth use or if there are other signal integrity issues in your network.

UTP (Unshielded Twisted Pair) is the most common type of Ethernet cable and relies on the twisting of wire pairs to reduce interference. STP (Shielded Twisted Pair) adds a layer of foil or braid shielding around the pairs and/or the cable itself for better protection against electromagnetic interference (EMI) in noisy environments.

While this cable is physically compatible, its CCA construction and 26AWG wire size are generally not recommended for reliable Power over Ethernet (PoE) applications, especially higher power standards, as it may lead to overheating or voltage drop.

AWG stands for American Wire Gauge. A lower AWG number indicates a thicker wire. 26AWG is a relatively thin conductor size for Ethernet cables, contributing to the cable's flexibility and lighter weight.

The red color does not affect the cable's performance but serves as a visual aid for easy identification and organization, especially when managing multiple cables.

Check that both ends of the cable are securely plugged into the correct ports. Try a different Ethernet port on your router or switch. Ensure your device's network adapter is enabled. Test with another known working Ethernet cable.

Verify the cable is not damaged or excessively kinked. Ensure the cable length (0.25m) is sufficient for your setup and not nearing signal degradation limits. Check router settings and other connected devices. If possible, test with a pure copper Cat5e or Cat6 cable to rule out CCA limitations.

Ensure you are using a standard RJ45 port and not a different type of connector. The moulded connectors are designed for a snug fit; ensure no debris is obstructing the port or connector.