PCB Holder Stand - Hakko - C1390C

The holder's clamp opening width adjusts from 0 to 20mm. This range is suitable for a wide variety of PCB thicknesses, but the overall board dimensions are not directly limited by the holder itself, rather by how securely it can be clamped within the 20mm opening.

While the holder is designed for optimal integration with Hakko's SMD-BGA repair system and FR-830, it can be used independently with most circuit boards as a general-purpose PCB vise, provided the board fits within the clamp's opening width.

The product information does not specify a maximum weight capacity. However, its 1.2 kg weight and robust construction suggest it is designed for standard PCB sizes encountered in repair and assembly.

Yes, replacement rubber pads are typically available through Hakko authorized service centers or parts suppliers. It is recommended to use genuine Hakko parts for optimal performance and protection.

The external dimensions of the holder are φ57 x 88 mm.

The Hakko C1390C PCB Holder Stand is typically shipped assembled and ready for use, requiring only placement on a workbench and insertion of the PCB.

Ensure the opening width is correctly adjusted to match the PCB dimensions. Check that the clamp jaws are clean and free of debris. Tighten the clamp mechanism sufficiently, but avoid overtightening, which could damage the board.

Inspect the rotation base for any obstructions or foreign material. Clean the base mechanism. If stiffness persists, a very light application of a suitable lubricant might be considered, but consult the product manual if available.

Verify that the desired height setting is properly engaged. Ensure no debris is obstructing the height adjustment mechanism. If the issue persists, the internal locking mechanism may require attention or professional inspection.

Contact Hakko support or a certified parts distributor for replacement rubber pads. Ensure they are installed correctly to protect components from damage during clamping.