TIMco Clout Nails - Silver - 25 x 3.0mm

The extra-large diameter head provides superior clamping force, which is essential for securely fixing materials like roofing felt and plasterboard without tearing or pull-through.

The galvanised finish offers medium duty rust protection (Corrosion Rating 2), making them suitable for rural and sheltered areas that may be occasionally damp. For highly corrosive environments like coastal areas, a higher level of protection may be required.

A 1kg bag contains approximately 485 nails.

These nails conform to Eurocode 5 and Service Class 2 standards.

Yes, these nails are compatible with most standard pneumatic nailing tools designed for clout nails of this size (25 x 3.0mm).

They are ideal for securing roofing felt and plasterboard in construction and DIY applications.

Service Class 2 indicates suitability for use in timber structures with a limited service life and in conditions where the moisture content of the timber corresponds to a temperature of 20°C and a relative humidity of 65%, meaning occasional dampness is acceptable.

Ensure you are using a suitable hammer with a flat face or a correctly calibrated pneumatic nailer. Check that the material being nailed into is not excessively hard or dense. Ensure the nail is driven straight.

This can occur during rough handling. For minor damage, the nail may still offer sufficient protection. For significant damage, consider using a replacement nail, especially if the application requires high corrosion resistance.

Verify the nail length is appropriate for the material thickness. Ensure the extra-large head is fully seated against the surface. Check for any obstructions or excessively hard knots in the material being penetrated.