Best current price£41.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£41.99Visit shop - 50M (164 Ft)Low Smoke Cat6 Network Ethernet Cable Copper Lszh Lsoh Ls0H Reel Drum
Visit shop3 offers from £41.99
View price history by clicking the chart icon.
This 50-meter Loops CAT6 Ethernet cable is designed for users needing reliable network connectivity over longer distances, particularly in environments prioritizing safety. Its key benefit is the Low Smoke Zero Halogen (LSZH) insulation, which reduces hazardous emissions during a fire. A potential consideration is that for 10Gbps speeds, its effective length is limited compared to CAT6A.
| Series | CAT6 |
|---|---|
| Brand | Loops |
LSZH stands for Low Smoke Zero Halogen. Cables with LSZH insulation emit very little smoke and no halogen gases (like hydrochloric acid) when exposed to fire, making them safer for indoor installations, especially in public buildings or poorly ventilated areas.
Yes, but only at reduced lengths. For 10GBASE-T (10Gbps) performance, this CAT6 cable is typically reliable up to approximately 37-55 meters. For longer runs at 10Gbps, a CAT6A cable is recommended.
A straight-through cable connects different types of devices (e.g., PC to a switch). A cross-over cable connects similar devices directly (e.g., PC to PC) and requires specific wiring standards (T568A on one end, T568B on the other).
The cable is marked at 1-meter intervals along its length, allowing you to easily measure and cut it to the precise size needed for your installation.
No, this is an Unshielded Twisted Pair (UTP) cable. While suitable for most home and office environments, shielded cables (STP/FTP) might be preferable in areas with high electromagnetic interference.
The conductor stand diameter is 0.5mm, which corresponds to 24AWG (American Wire Gauge).
Verify both ends of the cable are securely plugged into the correct ports. Check that the cable is not damaged. Test with a known working cable.
Ensure the cable is not exceeding the recommended length for the desired speed (especially for 10Gbps). Check that connected devices and network hardware support the expected speeds. Inspect for physical damage or tight bends.
Inspect the cable for any signs of damage, kinks, or crushing. Ensure connectors are clean and properly seated. Test if the issue persists when the cable is moved or bent.
Confirm the cable is correctly wired (straight-through or cross-over as needed) and terminated. Check the network interface settings on the device.
Setup:
This cable uses standard RJ45 connectors and can be terminated using standard network installation tools. It supports both straight-through wiring (T568A or T568B on both ends, typically used for connecting devices to a hub/switch) and cross-over wiring (T568A on one end, T568B on the other, used for directly connecting two devices like computers without a switch).
Compatibility:
This CAT6 cable is backward compatible with CAT5 and CAT5e standards and forward compatible with CAT7 and CAT8 standards, though performance will be limited by the lowest-rated component in the network. It is compatible with all standard networking equipment featuring RJ45 ports, including routers, switches, modems, computers, game consoles, and AV devices.
Care:
