Kenable Power Extension Cable - C14 to C13 - 1.8m

This cable is primarily used to extend an existing IEC power cord or to connect a device with an IEC power input to a UPS.

It features a C14 male coupler on one end and a C13 female coupler on the other.

The cable is rated for 10A (using 1.0mm² copper cores), making it suitable for standard computer equipment and office devices. It is not recommended for high-power appliances that exceed this rating.

Yes, if both your PC's power supply and your monitor use standard IEC power connections (C13 female socket), this cable can be used to extend the connection from the power source to either device.

'VDE Approved' signifies that the cable has undergone rigorous testing and meets the safety standards set by the VDE Institute, a respected certification organization in Europe.

The cable has a length of 1.8 meters.

No, this cable is designed for indoor use only. It is not weatherproof and should not be exposed to moisture or harsh environmental conditions.

Verify that both ends of the cable are securely plugged in. Check that the power source is active and functional. Ensure the device's original power cord is properly connected to the extension cable.

If the cable is only slightly warm, it may be normal. However, if it becomes excessively hot, unplug the device immediately. This could indicate the device is drawing more power than the cable is rated for (over 10A) or a faulty connection. Check device power consumption and inspect the cable for damage.

Ensure connectors are fully inserted. If the connection remains loose, the connector may be damaged. Inspect for bent pins or damage to the socket/coupler. Replace the cable if the connection is not secure.