JCP CONSTRUCTION PRODUCTS Sleeve Anchors - Countersunk Head - Gold

They are suitable for solid concrete, brick, and dense masonry. They are not recommended for hollow walls or lightweight blocks.

These anchors are designed for use with M8 bolts.

The countersunk head allows the anchor to sit flush with the surface once installed, providing a clean, professional, and unobtrusive finish.

Yes, the durable materials and gold finish offer some corrosion resistance, making them suitable for exterior applications, though regular inspection is recommended in harsh environments.

Proper installation involves drilling the correct size hole, ensuring it is clean, and tightening the bolt sufficiently to expand the sleeve securely within the material.

No, these anchors are specifically designed for solid masonry materials like concrete and brick. They are not suitable for plasterboard or hollow wall applications.

Ensure the correct size drill bit was used and that the hole is clean. Verify that the bolt being used is the correct M8 size and is being tightened sufficiently.

The hole may be too large or the material may be too soft. Remove the anchor and attempt to drill a slightly smaller hole, or use a larger anchor if possible. If the material is the issue, consider an alternative anchoring method.

The drill hole may not be deep enough or the countersunk area at the top of the hole was not created sufficiently. Ensure the hole is drilled to the correct depth and consider using a masonry drill bit with a countersinking edge if available.