1m 6.35mm Stereo Jack to Aux RCA Audio Cable - Black

This cable is designed to connect audio sources with a 6.35mm stereo jack output (like mixers) to devices with RCA auxiliary inputs (like HI-FI systems), and vice-versa due to its backward compatibility.

While you can plug a mono source into the 6.35mm jack, the cable is wired for stereo. You will likely only get sound through one of the RCA channels (typically the Right channel if using a standard mono adapter).

Oxygen Free Copper (OFC) conductors have fewer impurities, which reduces signal degradation and interference, resulting in a cleaner and more accurate audio signal transmission compared to standard copper.

No, this cable is specifically designed for analog audio signals only and cannot transmit video.

The cable is 1 meter (approximately 3.3 feet) in length.

The two RCA connectors are designed for stereo audio, with one typically designated for the Left channel (often Black or White) and the other for the Right channel (Red).

No, this is a passive audio cable. It is plug-and-play and does not require any drivers or software to function.

Ensure the 6.35mm plug is fully inserted into its jack. Verify that the Red and Black RCA plugs are connected to the correct Left and Right input/output ports on both devices. Check that the audio source is sending a stereo signal and that the receiving device is set to the correct input.

Check that all connections are secure. Ensure the cable is not routed near power cables, which can cause interference. Try plugging the connected devices into the same power outlet or surge protector to establish a common ground.

Confirm the cable is fully seated in the ports. Inspect the cable and connectors for any visible damage. The issue may lie with the connected audio devices rather than the cable itself; test with different equipment if possible.