Best current price£29.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£29.99Visit shop SAFE-TECH Wireless Interlinked Carbon Monoxide Detector for Home | CO Alarm with Live CO Level LCD,EN 50291 Certified,10 Year Sensor Carbon Monoxide Alarms for Kitchen, Gas Boiler Room
Visit shop5 offers from £29.99 - £206.99
View price history by clicking the chart icon.
The SAFE TECH AJ-833SI Carbon Monoxide Detector is designed for homeowners, property managers, and facility operators who require reliable, long-term atmospheric monitoring to protect against carbon monoxide poisoning. Featuring an advanced electrochemical sensor and 10-year battery life, it offers peace of mind with rapid detection capabilities; however, users should note that it is designed specifically for carbon monoxide and does not detect smoke or fire.
| Model Part Number | AJ-833SI |
|---|---|
| Brand | SAFE TECH |
No, the AJ-833SI is specifically designed for carbon monoxide detection. For smoke protection, consider the SAFE-TECH Home Interlinked Smoke Heat Alarms.
The 3V lithium battery is designed for a 10-year lifespan to match the sensor life. Once the unit expires, it must be replaced for your safety.
The system supports multiple units within the SAFE-TECH AJ series; please refer to the specific pairing guide included with your device for the maximum limit.
Immediately move to fresh air, open windows and doors to ventilate the area, and contact emergency services or a qualified gas engineer.
Install it in rooms with fuel-burning appliances and at least one unit on every floor and in or near sleeping areas.
Clean the exterior to ensure sensors are not blocked and restart the system according to the manual. If the fault persists, contact support as the sensor may have reached the end of its life.
Ensure the detector is not located too close to cooking fumes or moisture, and move it away from chemical cleaners or aerosol sprays.
Installation is straightforward using the included wall-mount hardware. Position the detector in areas where gas accumulation is likely, such as near gas boilers, heaters, or in sleeping quarters, keeping it at least 1-3 meters away from appliances to prevent false readings. To maintain the device, periodically test the alarm by pressing the test button. Use a soft, dry cloth to clean the exterior of the unit, and avoid using aerosol sprays or solvents near the sensor, as these can permanently damage the electrochemical membrane. The device is compatible exclusively with other SAFE-TECH AJ series interlinked alarms.
