Best current price£0.98from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£0.98Visit shop Xclio Cat6a Lszh Rj45 Moulded Snagless Ethernet Cable 0.25M Red Art-100-Hr
Visit shop
B&Q£5.20Visit shop B&Q - Cat6A Sstp Lszh Rj45 Network Ethernet Patch 10 Gigabit Cable 1M White
Visit shop35 offers from £0.98 - £33.50
View price history by clicking the chart icon.
This Cables Direct S/FTP CAT6A networking cable is designed for users needing reliable, high-speed network connections, particularly for 10 Gigabit Ethernet applications. Its primary benefit is delivering up to 600MHz of performance with robust shielding against interference. A minor caveat is its 1.5m length, which may require extension or multiple cables for larger setups. Key features include LSZH jacket, S/FTP shielding, snagless connectors, and flush strain relief.
| Series | Cat6a |
|---|---|
| Model Part Number | ART-101.5V |
| Brand | Cables Direct |
Cat6A is designed to support 10 Gigabit Ethernet (10GBASE-T) at higher frequencies (up to 600MHz) over longer distances (up to 100 meters) compared to Cat5e, which is typically limited to Gigabit Ethernet speeds.
S/FTP stands for Screened and Foil Twisted Pair. It means each individual pair of wires within the cable is shielded with foil, and there is an overall braid screen around all pairs. This provides superior protection against electromagnetic interference (EMI).
This cable features an LSZH (Low Smoke Zero Halogen) jacket, which is designed to emit less toxic smoke and corrosive gas during a fire. While LSZH is an improvement over standard PVC, always verify local building codes and regulations for plenum-rated cable requirements, as this specific product may not be plenum-rated.
While technically possible to connect two cables, it is not recommended. Each connection point (and cable segment) can introduce signal degradation or potential points of failure. For longer runs, it's best to use a single, continuous cable of the required length.
Yes, this Cat6A cable is backward compatible and will work perfectly with Gigabit Ethernet (1000BASE-T) devices and switches. You will simply be limited to the Gigabit speed of the connected equipment.
The snagless boot has a "bubble" design that protects the RJ45 connector's locking tab. This prevents the tab from being accidentally snagged or broken off when the cable is pulled through tight spaces or when connecting/disconnecting devices.
The flush moulded strain relief is integrated directly into the connector housing. It allows cables to be installed neatly side-by-side in high-density switch ports and provides flexibility at the connector base, reducing stress on the cable and preventing connection loss.
Ensure the cable is fully seated in both ports. Verify that both connected devices support speeds equal to or higher than the cable's capability (e.g., 10Gbps). Check for damage to the cable or connectors. Ensure connected devices are configured for the highest possible speed.
Check for physical damage to the cable or connectors. Ensure the cable is not routed near strong sources of electromagnetic interference. Try a different port on your router or switch. Confirm the locking tab on the RJ45 connectors is intact and engaging properly.
Inspect the RJ45 connector for any damage or debris. Ensure you are using a standard RJ45 port. The snagless boot should not impede connection; if it does, ensure it is not obstructing the connector.
Setup:
Compatibility:
Care:
