Cup Handle - Antique Brass - 76mm

The handle is made from solid brass with an antique, brushed brass finish.

The handle has 76mm hole centres, a length of 40mm, a width of 92mm, and a projection of 20mm.

Each item type, including this cup handle, is sold individually.

It suits rustic, country farmhouse, shaker-style interiors, as well as more minimal and simple schemes due to its classic design and refined finish.

Clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals to preserve the finish. Dry immediately with a soft cloth.

This handle is primarily designed for internal use on cabinetry and furniture. Its suitability for external applications may depend on environmental exposure and requires further specific testing.

Standard cabinet or drawer screws that match the depth of your material and the handle's thread. Screws are usually inserted from the inside of the door or drawer.

Ensure the mounting screws are fully tightened. Check that the cabinet or drawer material is solid enough to hold the screw securely. If not, consider using slightly longer screws or appropriate anchors.

Verify that your existing holes are exactly 76mm apart (centre to centre). If not, you may need to fill the old holes and drill new ones, or consider a handle with different fixing centres.

Inspect the handle for any defects upon arrival. For issues arising after installation, ensure proper cleaning methods are used. Avoid aggressive cleaning agents.

Ensure you are using the correct type and size of screwdriver. Check if the screw threads are damaged. Try wiggling the screw slightly while turning. If installing into hard wood, pre-drilling pilot holes can help.