Godox iT32 iFlash TTL Flashgun - Godox

The modular hot-shoe system allows you to easily swap out the hot-shoe adapter to make the flash compatible with different camera brands (e.g., Canon, Nikon, Sony) by simply changing the module, without needing to buy a completely new flash.

Yes, for full TTL and High-Speed Sync (HSS) capabilities with specific camera brands, you will need to pair the Godox iT32 with the appropriate Godox X5 trigger and module for your camera.

The flash has a built-in rechargeable lithium battery that can be charged conveniently via a USB-C port using a standard USB-C cable and power adapter.

Yes, the iT32 features a built-in Godox 2.4 GHz X-System receiver, allowing it to be used off-camera when controlled by any compatible Godox X-Series trigger.

The Godox iT32 iFlash has a recycle time of approximately 1.5 seconds at full power, ensuring quick turnaround between shots.

Absolutely. The built-in 2.4 GHz X-System receiver makes it fully compatible with other Godox X-Series triggers and lights, enabling complex lighting setups.

The flash features a modern touchscreen interface combined with a rotary dial, providing an intuitive and efficient way to adjust settings.

Ensure the flash is powered on and the battery is charged. Verify the hot-shoe connection is secure and clean. Check that the correct X5 module is attached for your camera. If using wireless, confirm the trigger and flash are on the same channel and group.

Ensure the X5 trigger and flash firmware are up to date. Check for any lens corrections or camera settings that might affect flash metering. Try manually adjusting flash exposure compensation if TTL is consistently over or under-exposing.

Confirm that the Godox 2.4 GHz X-System receiver is enabled on the flash. Ensure the trigger and flash are set to the same ID and channel. Check the range between the trigger and the flash; obstructions can interfere with the signal.

Gently clean the screen with a dry, lint-free cloth. Restart the flash by powering it off and on. Ensure your fingers are dry when operating the touchscreen.

Ensure the battery is fully charged. In very cold conditions, battery performance may be temporarily reduced. If the issue persists, check for any internal obstructions or contact support.