Sparmax MAX-3 Airbrush - MAX-3
Best current price£69.95from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£69.95Visit shop Sparmax MAX-3 Airbrush 0.3mm Gravity-Fed Dual-Action
Visit shopeBay£69.95Visit shop All Offers
2 offers from £69.95 - £71.95
View price history by clicking the chart icon.
eBaySparmax MAX-3 Airbrush 0.3mm Gravity-Fed Dual-Action
Free delivery in 1–3 days
£69.95
Visit shop
OnBuy.comSparmax Max-3 Airbrush 0.3Mm Gravity-Fed Dual-Action 4712946602625
Free delivery in 1–3 days
£71.95
Visit shop
Product Information
Full details
The Sparmax MAX-3 airbrush is designed for artists and hobbyists seeking versatile, detailed spraying capabilities, particularly with smaller compressors. Its key benefit is excellent atomization at low pressures, enabling fine detail work. A potential caveat is its gravity-feed system which requires a slightly different handling approach than siphon-feed models. This dual-action airbrush features a 0.3mm needle and nozzle for general to detailed use, a preset handle for controlled color flow, and a crown cap for precision. It can be converted to single-action for simpler operation.
All features
| Model Part Number | MAX-3 |
|---|---|
| Brand | Sparmax |
Extended Product Information
FAQs
What is the main advantage of the Sparmax MAX-3?
Its primary advantage is excellent atomization at low air pressures, allowing for detailed work even with small compressors.
Can I use this airbrush for all types of paint?
Yes, it's suitable for most airbrush-ready paints, including acrylics, inks, and lacquers. Thicker paints may require thinning.
How do I convert it to single-action?
The airbrush includes a Single-action Air Valve that can be installed to convert its operation.
What size air hose fitting does it use?
It typically uses a standard 1/4" air hose fitting, compatible with most air compressors.
How often should I clean the airbrush?
It's recommended to perform a basic cleaning after each use and a deep cleaning periodically, especially when switching paint types or if performance degrades.
What does the preset handle do?
The preset handle limits the maximum paint flow, helping to prevent accidental over-spraying and maintain consistency.
Is the paint cup removable?
The MAX-3 features a fixed 1/4 oz (7ml) gravity-feed cup with a lid.
Troubleshooting
Airbrush sputters or sprays unevenly.
Check that the needle and nozzle are clean and properly seated. Ensure paint is adequately thinned. Verify sufficient air pressure and a clean air supply.
No paint is spraying, but air is flowing.
The needle may be clogged or retracted too far. Clean the needle and nozzle. Ensure the trigger is being pulled back sufficiently. Check if the paint cup is empty.
Trigger is stiff or difficult to move.
Disassemble and clean the airbrush, paying attention to the trigger mechanism and needle packing. Ensure no paint residue is binding the parts. Lubricate seals if necessary.
Paint leaks from around the trigger or air cap.
Check the needle packing nut; it may need tightening. Inspect seals and O-rings for wear or damage and replace if necessary.
Pros and Cons
Pros
- Excellent atomization at low air pressures.
- Versatile for both general and fine-detail spraying.
- Preset handle helps control paint flow and prevent over-spraying.
- Can be easily converted between dual-action and single-action modes.
- Crown cap allows for closer work and needle protection.
Cons
- Gravity-feed system may require a slight adjustment period for users accustomed to siphon-feed.
- Fixed 1/4 oz cup size might be limiting for very large projects.
- Requires a compatible air source (compressor or canned air).
Setup, Compatibility & Care
Setup:
- Ensure the airbrush is clean and all parts are securely assembled.
- Connect your air source (compressor or canned air with adapter) to the air inlet.
- Load your desired paint into the gravity-feed cup. Start with a small amount.
- Test the spray pattern on scrap material, adjusting air pressure and trigger control as needed.
Compatibility:
- Air Source: Compatible with most air compressors with standard 1/4" fittings. An adapter may be needed for specific connections or canned air.
- Paints: Suitable for most airbrush-ready paints, including acrylics, inks, lacquers, and watercolors. Thinning may be required for thicker paints.
Care:
- After Each Use: Immediately clean the needle, nozzle, and cup with the appropriate cleaner (water for water-based paints, solvent for others).
- Deep Cleaning: Periodically disassemble the airbrush for thorough cleaning of all internal components. Refer to the manufacturer's manual for detailed instructions.
- Storage: Store in a clean, dry place away from direct sunlight. Ensure the needle is retracted to prevent damage.