Abigail Ahern Emulsion - Brown

Abigail Ahern Emulsion typically provides a matte or low-sheen finish, designed to minimize glare and enhance the depth of the color.

Generally, two coats are recommended for optimal coverage and color depth. However, this can vary depending on the surface condition and the color being covered. A third coat may be beneficial for achieving full opacity over darker or highly contrasting backgrounds.

While this emulsion is suitable for general interior walls, it's primarily designed for living spaces where a soft and calming aesthetic is desired. For high-moisture areas like kitchens and bathrooms, a paint specifically formulated for these environments (e.g., with enhanced durability and moisture resistance) might be more appropriate.

Walls should be clean, dry, and free from dust and grease. Fill any imperfections and sand smooth. Priming is recommended, especially on new surfaces or when covering dark colors, to ensure the best adhesion and color finish.

It is generally not recommended to mix paints from different brands or types, as this can affect the paint's performance, finish, and durability. Always use products from the same range or as recommended by the manufacturer.

Drying time can vary, but typically allow 2-4 hours for the first coat to dry before applying a second coat. Always refer to the specific product instructions for precise drying times.

Ensure paint is thoroughly stirred before and during use. Apply paint evenly with a brush or roller, working in one direction. Avoid overloading the brush/roller. Allow adequate drying time between coats.

Ensure the surface was properly prepared and primed if necessary. Apply a second or third coat. Check that the paint has not dried out in the tin.

The surface may not have been properly cleaned, dry, or prepared. Ensure the surface is free from dust, grease, and has been primed if required. Avoid painting in very humid or cold conditions.