Soho Lighting Anthracite LED Downlights - Fire Rated - Fixed - IP65 - CCT Switch - High CRI - Dimmable - Grey

High CRI (Colour Rendering Index) means the light source is very good at accurately displaying colours compared to natural light. A CRI of 95-97 indicates excellent colour fidelity, making colours appear natural and vibrant.

Yes, the IP65 rating means it is protected against dust and water jets, making it suitable for bathroom zones 1 and 2 (wet rooms, shower areas).

Use the small switch located on the front of the downlight. It allows you to select between Warm White (3000K), Daylight (4000K), and Cool White (6000K). It's best to do this when the power is off.

The required cut-out diameter for this downlight is 70mm.

Yes, the downlight is dimmable, but it requires a compatible LED dimmer switch. Ensure your dimmer is rated for LED loads.

The fire rating (30, 60, and 90 minutes) ensures the downlight meets building regulations for fire safety by helping to maintain the integrity of fire barriers in ceilings.

Please refer to the product packaging or the retailer's website for specific warranty information, as this can vary.

Check that the mains power is on, the circuit breaker is not tripped, and the wiring connections are secure. Ensure the CCT switch has been set to a valid position.

This is often due to an incompatible dimmer switch. Try a different LED-compatible dimmer or remove the dimmer to test if the issue persists. Ensure all connections are tight.

Ensure the light is switched off at the mains before attempting to use the CCT switch. If the switch is stiff, try gently rocking it. If the issue persists, contact support.

Verify the power supply is providing the correct voltage. Check that the downlight is not obstructed and that the wattage (10W) is appropriate for the area.