Ausom Electric Scooter - Dual 1000W Motor, 52V 20.8Ah Battery, 10 inch Tires, 65km/h Max Speed, 95km Range

The maximum load capacity for the Ausom SR1 is 130 kg.

Present the provided NFC card to the designated reader on the scooter. Refer to the user manual for initial pairing and specific activation steps.

Yes, the scooter features USB-A and USB-C outputs that allow you to charge compatible devices directly from the scooter's battery.

An IP54 rating means the scooter is protected against dust ingress and water splashes from any direction. It is not designed for submersion or riding through deep water.

With dual charging inputs, the charging time can be significantly reduced. A full charge from empty typically takes several hours, but specific times may vary. Consult the user manual for estimated charging times.

The Ausom SR1 includes multiple riding modes such as Eco, Sport, and Race, allowing you to tailor performance to your preference. It also features cruise control and walk modes.

Yes, the scooter is equipped with rugged 10 x 3 inch off-road tires designed to provide grip and stability on various terrains, including unpaved paths.

Ensure the battery is charged. Check if the NFC card is properly presented to the sensor. Verify the power switch is engaged.

Check tire pressure; underinflated tires increase resistance. Ensure battery is fully charged. If the issue persists after several cycles, battery health may be degraded.

Inspect brake pads and rotors for wear or debris. Ensure hydraulic fluid levels are adequate (if applicable for hydraulic brakes). Adjust brake sensitivity if possible via settings or mechanic.

Ensure the NFC card is clean and properly aligned with the reader. Try re-pairing the NFC card with the scooter. Check if the scooter's battery is sufficiently charged.

Check the connection between the dashboard and the main controller. If the issue persists, consult the user manual or manufacturer support.