Best current price£0.92from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£0.92Visit shop Timco Sds55110 Sds Plus Hammer Bit 5.5 X 110 Clip 1
Visit shop
B&Q£5.25Visit shop B&Q - TimcoSds Plus Hammer Bit (Size 5.5 X 1101 Each)
Visit shopB&Q£5.45Visit shop B&Q - TimcoSds Plus Hammer Bit (Size 4.0 X 1601 Each)
Visit shop19 offers from £0.92 - £9.15
View price history by clicking the chart icon.
The Timco SDS Plus Hammer Bit (5.5 x 110mm) is designed for professional tradespeople and serious DIY enthusiasts working with rotary hammer drills. Its primary benefit is efficient, durable masonry drilling thanks to a tungsten carbide tip and heat-treated steel, though users should note it is strictly for SDS Plus chuck systems and is not compatible with standard three-jaw drill chucks.
| Model Part Number | AP15260 |
|---|---|
| Brand | Timco |
No, this bit requires an SDS Plus chuck system to function correctly.
The working length is 50mm, which is the maximum depth you can drill.
No, this is a masonry bit intended for concrete, brick, and stone. Using it on metal will cause rapid tip failure.
The bit is finished with a shot blast coating, but it should still be wiped clean and stored in a dry place after use.
The SDS Plus shank diameter is 10.0mm.
Ensure your drill is an SDS Plus model; this bit is incompatible with standard 3-jaw chucks.
Check that the hammer function on your drill is engaged and ensure the tungsten carbide tip is not worn down.
Periodically pull the bit out of the hole while drilling to clear accumulated dust and debris.
To install, pull back the locking collar on your SDS Plus chuck, insert the shank until it clicks into place, and release the collar. Always verify the bit is locked by pulling firmly on it before starting the motor.
Compatibility: This bit is only compatible with rotary hammer drills equipped with an SDS Plus tool holder. It will not work with standard drill drivers.
Care Instructions:
