Rawlplug Frame Fixing - Grey - 10 x 120mm

You need a 10mm drill bit for the 10mm Rawlplug Frame Fixing.

These fixings are suitable for uPVC, timber, and metal door frames, when installed in a suitable substrate, such as brick or concrete.

The number of fixings required will depend on the size of the door frame and the load it will bear. It is recommended to use at least three fixings per side of the frame.

Yes, the nylon construction is suitable for outdoor use, but ensure the substrate is also suitable.

The zigzag design allows for greater expansion in the hole, providing a more secure fixing, especially in slightly oversized holes.

The anti-rotation lugs prevent the fixing from spinning in the hole when tightened, ensuring a secure and reliable hold.

The nylon sleeve prevents the fixing from distorting during tightening, ensuring a strong and secure hold.

Ensure the hole is not too large. If necessary, use a slightly larger diameter fixing or fill the hole with a suitable filler before inserting the fixing. Make sure the anti-rotation lugs are engaged.

Check that the fixing is fully inserted and tightened. Verify that the correct size and type of fixing is used for the application. Ensure the substrate is solid enough to hold the fixing.