Gyproc Easi-Fill 60 Two Coat Joint Filler Compound - White - 10kg

The initial set time is around 60 minutes, and the second coat can be applied after 140 minutes. However, drying times can vary depending on environmental conditions.

Gyproc Easi-Fill is primarily designed for use on plasterboard and similar surfaces, not wood. For wood, use a wood filler.

Store in a dry place. Keep the container sealed when not in use to prevent the product from hardening.

Shelf life varies, but it is generally recommended to use the product within a reasonable timeframe after purchase. Check the packaging for specific guidance.

Yes, it is advisable to apply Gyproc Easi-Fill in thin layers to ensure proper drying and prevent cracking.

You will need a filling knife or trowel, a mixing container, and clean water.

Clean tools and equipment immediately with water before the filler sets. Dried filler can be difficult to remove.

Add a small amount of water and mix thoroughly until you achieve the desired consistency.

Ensure the filler is applied in thin layers. Avoid applying too much filler at once. If cracks appear, sand and reapply.

Check the room temperature and humidity. Ensure adequate ventilation. Allow more drying time if needed.

Mix the filler slowly to avoid incorporating too much air. Apply the filler smoothly.