Hasselblad CPL Filter - 86mm

A Circular Polarizer (CPL) filter reduces reflections from non-metallic surfaces like water and glass, enhances color saturation, and deepens blue skies by filtering out polarized light.

No, this 86mm CPL filter is specifically designed for the Hasselblad XCD 35-100mm f/2.8-4 E Lens. Always check your lens's filter thread size.

You adjust the effect by rotating the outer ring of the filter. Observe the scene through your viewfinder or LCD screen as you turn it until you achieve the desired level of reflection reduction or color enhancement.

You would need a step-up ring to adapt it. However, using filters with step-up rings can increase the risk of vignetting, especially on wider lenses.

While CPL filters can slightly reduce the amount of light entering the lens (often by 1-2 stops), modern autofocus and metering systems generally compensate well. Some older camera systems might require exposure adjustments.

Use a soft, lint-free microfiber cloth. For tougher smudges, use a lens cleaning solution specifically designed for optical glass on the cloth, not directly on the filter. Gently wipe in a circular motion.

A slim mount helps prevent vignetting (darkening of the corners of the image) when used on wider-angle lenses. This ensures that the entire frame remains sharp and evenly lit.

Ensure the filter is properly seated and not excessively thick for the lens. While this filter has a slim mount, extremely wide focal lengths combined with certain camera bodies might still present minimal vignetting. Try shooting at slightly longer focal lengths if possible.

Check that the filter glass is clean. Use a microfiber cloth to gently remove any dust or smudges. Ensure the filter is screwed on straight and securely.

The effectiveness of a CPL filter depends on the angle of the light source. Try adjusting your shooting position or the angle of your camera relative to the reflective surface and the sun. Ensure the filter is rotated to the correct position for maximum effect.

Ensure you are screwing the filter on straight. Do not overtighten. If it's stuck, gently try to unscrew it. Sometimes, a rubber grip can help. Avoid forcing it.