JRP Riveting Products Peel Rivets - 4.8 X 25mm - Silver

These rivets are versatile and can be used with a variety of materials including sheet metal, plastic, wood, and composites.

For a 4.8mm rivet, a pre-drilled hole of approximately 4.9mm to 5.0mm is generally recommended. Always refer to your specific tool and material guidelines.

Yes, a standard rivet gun (also known as a pop rivet tool) is required to install these peel rivets.

Peel rivets are designed to create a broader blind side break, making them suitable for softer materials like plastic or thin sheet metal, as they spread the load and prevent damage. Standard rivets offer a more uniform break.

Yes, the aluminum and steel construction provides good resistance to corrosion for outdoor use, though prolonged exposure to harsh elements may eventually cause surface oxidation.

The product information does not specify the quantity per pack. Please refer to the product packaging or seller information for exact quantities.

Ensure the rivet gun is functioning correctly and the jaws are clean. Check that the rivet is fully seated in the hole and that the material thickness is appropriate for the rivet length.

The rivet gun may require adjustment or maintenance. Ensure you are using the correct size rivet for your tool and that the jaws are not worn.

Verify that the materials are properly aligned and that the rivet is the correct size for the combined thickness. Ensure the rivet was set completely.

While aluminum and steel offer good durability, prolonged exposure to harsh environments can lead to corrosion. Consider using specialized sealants if extreme conditions are expected.