Saniflo SANISHOWER Flat Pump - 1043/3

Ideal pumping solution for a low level shower tray. Capable of pumping a standard electric or grav...

Best current price£339.00from Waterpump UK

All Offers

4 offers from £339.00 - £467.25

View price history by clicking the chart icon.

Waterpump UKSfa White / Grey Saniflo Sanishower Flat Saniflo For Showers
Free delivery in 1–3 days
£339.00
Visit shop
B&Q - Saniflo 1043/3 Sanishower Flat Pump For Low Level Shower Tray Cubicle & Basinsss
Free delivery in 1–3 days
£351.08
Visit shop
eBaySaniflo Sanishower Flat Lifting Station Macerator Pump 1043/3
Free delivery in 1–3 days
£363.08
Visit shop
OnBuy.comSaniflo Sanishower Flat Lifting Station Macerator Pump 1043/3 3308815061016
Free delivery in 1–3 days
£467.25
Visit shop

Product Information

Full details

The Saniflo SANISHOWER Flat Pump is ideal for adding a shower and wash basin to spaces where gravity drainage is an issue, such as basements or lofts. Its key benefit is providing a solution for low-level shower trays, pumping wastewater up to 3 meters vertically or 30 meters horizontally. However, it's essential to note that the pump requires a 220-240V/50Hz power supply and should be installed following the provided guidelines to ensure optimal performance. This guide will help you understand and effectively use the Saniflo SANISHOWER Flat Pump.

All features

Model Part Number1043/3
BrandSaniflo

Extended Product Information

FAQs

What is the maximum vertical discharge height?

The Saniflo SANISHOWER Flat Pump can pump water up to 3 meters vertically.

What is the maximum horizontal discharge length?

The pump can discharge water up to 30 meters horizontally.

What is the recommended discharge pipe diameter?

The recommended discharge pipe diameter is 32 mm for the shower and 40 mm for the washbasin.

What is the activation level of the pump?

The activation level is 30 mm.

Can I use the pump with a toilet?

No, the Saniflo SANISHOWER Flat Pump is designed for use with showers and wash basins only.

What is the power consumption of the pump?

The motor power is 250 W, and the maximum current consumption is 1.3 A.

What is the IP rating of the pump?

The IP rating is IP44, which means it is suitable for bathrooms.

Where can I register the guarantee?

You need to register the guarantee directly with Saniflo.

Troubleshooting

Pump does not turn on.

Check the power supply and ensure the unit is correctly connected. Inspect the fuse and the power outlet.

Pump runs continuously.

Check for any leaks in the system. Ensure the float switch is operating correctly and not obstructed.

Poor pumping performance.

Check for blockages in the inlets or discharge pipework. Clean or replace the pump if needed.

Unusual noises from the pump.

Inspect the pump for any debris. Ensure the pump is correctly mounted and not vibrating excessively.

Water is not draining.

Check the activation level and that there is sufficient water to trigger the pump to start. Ensure that the water is draining to the unit.

Pros and Cons

Pros

  • Allows for the installation of showers and wash basins in locations where gravity drainage is problematic.
  • Suitable for low-level shower trays, providing flexibility in bathroom design.
  • Easy to service and maintain, reducing downtime.
  • Offers a hygienic solution, preventing the build-up of unpleasant odors.
  • Quiet operation, minimizing disturbance.
  • Suitable for domestic applications.

Cons

  • Requires a power supply (220-240V/50Hz).
  • Installation requires adherence to specific guidelines.
  • Not suitable for toilets.
  • May require professional installation for optimal performance.

Setup, Compatibility & Care

Setup

  1. Placement: Position the pump next to the shower tray and/or wash basin, ensuring it is on a level surface.
  2. Inlet Connections: Connect the shower waste and wash basin waste (if applicable) to the inlets using the appropriate sized pipes (16mm inlet diameter).
  3. Discharge Pipework: Connect the discharge pipework (22 or 32 mm) to the pump outlet, routing it to the main sewage system.
  4. Electrical Connection: Connect the pump to a 220-240V/50Hz power supply, adhering to all electrical safety regulations.
  5. Testing: After installation, test the pump by running water through the shower and/or wash basin to ensure proper operation.

Compatibility

  • Showers: Compatible with electric and gravity mixer showers.
  • Wash Basins: Compatible with wash basins.
  • Shower Trays: Suitable for shower trays of 80mm and over.
  • Pipework: Use 22 or 32mm discharge pipework.

Care

  • Cleaning: Clean the unit regularly with standard toilet cleaners. Avoid cleaners that create a high level of foam.
  • Maintenance: Regularly inspect the pump for any blockages or leaks.
  • Service Access: The unit is designed for easy service access through convenient covers.
  • Warranty: Register the guarantee directly with Saniflo.

Price History

DatePrice
Visit shop