Generate 0.96kWh power per day under 4 hours' full sunlight, which can fully charge a 12V 50Ah bat...Generate 0.96kWh power per day under 4 hours' full sunlight, which can fully charge a 12V 50Ah battery. Perfect for sheds, caravans, caravans, motorhomes, boats, trailers, golf carts, etc. The monocrystalline solar panel is compactly designed with the size of 960*670*35mm. The aluminum frame and tempered glass panel is perfect for outdoor use, allowing the panels to last for decades. The IP66 waterproof panel can also withstand high winds (2400Pa) and snow loads (5400Pa). The 30A solar charge controller has build-in short-circuit protection, open-circuit protection, and over-load protection, which ensures safety. It supports 3 types of batteries: lithium batteries, lead acid batteries and gel batteries. With pre-drilled holes, the panels can be easily installed on the roof or on the ground by adjustable solar panel tilt mount brackets. Each solar panel comes with 90cm 12awg cable with Male/Female quick connectors. Please connect 12V/24V battery with the controller. This kit includes 2pcs 120W solar panels, a 1 pair of 5m (16.4") 4mm solar cables, a 1 pair of Y Branch Connectors, 2 sets of Z mounting brackets, and a 30A solar charge controller.
This ECO-WORTHY 240W 12V Solar Panel Kit is designed for off-grid applications such as sheds, caravans, motorhomes, and boats, providing a reliable source of renewable energy. It generates approximately 0.96kWh of power daily, capable of fully charging a 12V 50Ah battery under optimal conditions. While robust and durable for outdoor use, users should be aware of the need for a compatible 12V/24V battery system and ensure proper installation for maximum efficiency.
All features
Model Part Number
L02M120N-CWMZ-2
Brand
ECO-WORTHY
Extended Product Information
FAQs
What is the total wattage of this kit?
This kit includes two 120W solar panels, for a total rated wattage of 240W.
Can I use this kit with a 24V battery system?
Yes, this kit can be used with a 24V battery system. You will need to configure your battery bank as 24V (e.g., two 12V batteries in series) and ensure the charge controller is set to operate at 24V. The panels can also be wired in series for a higher voltage input if your charge controller supports it.
What is the warranty period for the panels and controller?
Please refer to the product documentation or manufacturer's website for specific warranty details on the solar panels and charge controller, as these can vary.
Do I need an inverter with this kit?
This kit provides DC power. If you need to power AC devices (like standard household appliances), you will need to purchase a separate DC-to-AC inverter and connect it to your battery system.
How many hours of sunlight are needed to charge a battery?
The kit is rated to generate 0.96kWh per day under 4 hours of full sunlight. The time it takes to fully charge a specific battery depends on the battery's capacity (Ah), its current state of charge, and the actual sunlight conditions.
What is the IP rating of the solar panels?
The solar panels have an IP66 waterproof rating, meaning they are protected against dust ingress and powerful water jets.
Are the cables included long enough for most installations?
The kit includes 90cm cables attached to the panels and a pair of 5m (16.4ft) 4mm solar cables. Depending on your installation distance between panels and the controller, you may need to purchase additional extension cables.
Troubleshooting
Solar panel not producing power
Check all cable connections for tightness and correct polarity. Ensure the panels are clean and receiving direct sunlight. Verify the charge controller is functioning and not showing error codes.
Battery not charging
Confirm the charge controller is connected to the battery first. Check battery voltage and ensure it is within the acceptable range for the charge controller. Inspect the battery for any damage or signs of failure.
Charge controller error codes
Refer to the charge controller's user manual for a specific explanation of the error codes displayed and follow the recommended troubleshooting steps.
Low power output
Clean the solar panels. Check for any shading throughout the day. Ensure the panels are optimally angled towards the sun. Verify the charge controller is set to the correct battery type and voltage.
Panel damage (cracks, etc.)
Inspect panels for physical damage. If significant damage is present, the panel may need replacement. Contact the manufacturer for warranty claims.
Pros and Cons
Pros
Generates significant daily power for small off-grid needs.
Robust construction ensures long-term durability in outdoor environments.
Integrated safety features in the charge controller protect battery systems.
Versatile compatibility with various battery types.
Comprehensive kit simplifies initial setup.
Designed for ease of installation with included mounting hardware.
Cons
Performance is highly dependent on sunlight availability and angle.
Requires a separate compatible 12V or 24V battery and potentially an inverter for AC power.
The included charge controller is PWM, which is less efficient than MPPT for advanced systems.
Long-term performance may be affected by panel soiling or shading.
Maximum output may not be sufficient for high-demand applications.
Setup, Compatibility & Care
Setup:
Mounting: Securely attach the solar panels using the included Z brackets to a suitable surface (roof, ground mount) ensuring they are angled towards the sun. Pre-drilled holes on the panels facilitate this.
Wiring: Connect the solar panels to the charge controller using the provided solar cables and Y branch connectors. Ensure correct polarity (+/-).
Battery Connection: Connect the charge controller to your 12V or 24V battery. The controller must be connected to the battery *before* the solar panels are connected to the controller.
Load Connection: If applicable, connect your DC loads to the designated load terminals on the charge controller.
Compatibility:
Batteries: Compatible with 12V or 24V lead-acid, gel, and lithium batteries.
System Voltage: Designed for 12V systems, but can be configured for 24V systems by wiring panels in series or using two 12V batteries in series, provided the charge controller is set appropriately (check controller manual).
Care:
Cleaning: Periodically clean the surface of the solar panels with a soft, damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
Inspection: Regularly check wiring connections for corrosion or damage and ensure the panels are securely mounted.
Shading: Minimize shading on the panels from trees, buildings, or other obstructions to maximize performance.
Ventilation: Ensure the charge controller is installed in a well-ventilated area to prevent overheating.