Bartoline Instant Filler is suitable for interior and exterior use. Ideal for repairs to plaster, ...Bartoline Instant Filler is suitable for interior and exterior use. Ideal for repairs to plaster, plasterboard, brick, wood and stone. Easy to use and sand down. Dries white. PREPARATION: Ensure surfaces to be filled are clean, dry and dust free. Cover nails and screw heads with an oil-based primer to prevent rusting. DIRECTIONS: Work the tube well between fingers. Remove cap and cut off tip of nozzle at a 45Degrees angle, gently squeeze product into area to be filled and level with a filling tool or scraper. Once dry, smooth with sandpaper. In larger areas, apply filler in layers of no more than 6mm thick, allowing each layer to set before applying the next. If used on exposed outside surfaces seal filler with an oil-based paint. Protect from rain and water until sealed. Do not use on surfaces regularly under water. CLEANING and STORAGE: Clean tools with water before filler sets hard. After use, ensure cap is firmly replaced. PROTECT FROM FROST. To avoid releasing microplastics into the environment, keep all dust from sanding, rinsing water, and leftover product in a closed container and dispose of it at a local household waste collection point (for consumers) or by contracting a waste management company (for professionals).
Bartoline Instant Filler is suitable for interior and exterior use. Ideal for repairs to plaster, plasterboard, brick, wood and stone. Easy to use and sand down. Dries white. PREPARATION: Ensure surfaces to be filled are clean, dry and dust free. Cover nails and screw heads with an oil-based primer to prevent rusting. DIRECTIONS: Work the tube well between fingers. Remove cap and cut off tip of nozzle at a 45Degrees angle, gently squeeze product into area to be filled and level with a filling tool or scraper. Once dry, smooth with sandpaper. In larger areas, apply filler in layers of no more than 6mm thick, allowing each layer to set before applying the next. If used on exposed outside surfaces seal filler with an oil-based paint. Protect from rain and water until sealed. Do not use on surfaces regularly under water. CLEANING and STORAGE: Clean tools with water before filler sets hard. After use, ensure cap is firmly replaced. PROTECT FROM FROST. To avoid releasing microplastics into the environment, keep all dust from sanding, rinsing water, and leftover product in a closed container and dispose of it at a local household waste collection point (for consumers) or by contracting a waste management company (for professionals).