Osma Soil Access Plug - 110mm - White

This is a 110mm access plug, designed for use with 110mm diameter OsmaSoil pipes and fittings.

Reycore Technology is a manufacturing process used by Wavin that ensures the quality and performance of their OsmaSoil products are consistently maintained.

While it fits into a standard ring-seal socket, it is specifically designed for the Wavin OsmaSoil system. For optimal performance and guaranteed compatibility, it is recommended for use within the OsmaSoil range.

The plug is designed to be removed to provide access. You may need to use a tool to gently lever it out, depending on how securely it is seated and how long it has been in place.

Yes, this Osma Soil Access Plug is Kitemarked, indicating it meets relevant British Standards and quality regulations.

An access plug covers an opening in the soil pipe system, providing a sealed point that can be opened later for inspection or maintenance, preventing the need to cut into the pipework.

Ensure the socket and the plug's seal are clean and free from dirt or obstructions. A small amount of silicone lubricant on the seal can aid insertion. Check that you are using the correct 110mm plug for the 110mm OsmaSoil socket.

Carefully remove the plug and inspect the seal. Re-seat the seal correctly onto the plug, ensuring it is evenly positioned. Re-attempt insertion, paying attention to maintaining the seal's position.

Check that the plug is fully seated in the socket. Remove and reinsert the plug, ensuring the socket rim and the plug's seal are clean and undamaged. If the issue persists, the seal may be damaged, and the plug may need replacement.