Loops 100W Bluetooth Wall Mounted Amplifier & 4x 80W Stereo Ceiling Speaker Kit
Wired Connections: Screw Fit Speaker Terminals: Labelled; (R- & R+) for negative and positive conn...Wired Connections: Screw Fit Speaker Terminals: Labelled; (R- & R+) for negative and positive connections to the right speaker(s), (L- & L+) for the left speaker(s). Screw Fit Auxiliary Input: For a direct wired connection to a source device such as a smartphone. Micro SD Card: The amplifier can also play MP3 tracks stored on a Micro SD Card. Simply insert card at the bottom of the panel. Technical Specification: Output Impedance: 4 to 8 Ohms Output Power RMS: 2 x 30W @ 8 Ohms (60W) Output Power MAX: 2 x 40W @ 8 Ohms (80W) Output Power RMS: 2 x 50W @ 4 Ohms (100W) Output Power MAX: 2 x 70W @ 4 Ohms (140W) Operating Voltage: 90 – 220V AC Frequency Response: 20Hz to 20 KHz Dimensions (HxWxD): 86x86x53mm Weight: 190g Speakers Technical Specification: 13cm / 5 Inch 5cm (2 Inch) Tweet with Mylar Cone Woofer with Polypropylene cone 6mm Spade terminal connectors Built-In Crossover All Fixings supplied. 2-Way Speakers Max Power - 80w Power RMS - 40w Frequency Response - 80Hz-18kHz Impedance - 8 Ohms Moisture resistant Dual Cone Speaker 130mm diameter, for fitting to a 114mm cut-out / Depth - 65mm HOW TO INSTALL: 1) - Run all of the cables you need to run before starting the install, this includes mains power cables, speaker cables and any other audio cables (for AUX ports). PLEASE ENSURE THAT ELECTRICITY IS TURNED OFF WHEN INSTALLING. 2) - You now need to prepare your wall for the amplifier to be mounted, you will need to cut a hole for this to be recess mounted or use a surface mounted back box (please see supplied instruction manual for full details). 3) - Wire the mains power cable and speaker cables to rear of the amplifier via the screw terminal connections. Connect the other end of the speaker cables to the speakers ensuring that you wire positive to positive & negative to negative. 4) - You can now power up the unit, select a source and listen to your chosen music. Amplifier Overview: Connectivity This amplifier offers both Wi-Fi and Bluetooth connectivity. This is great if you are regularly switching between devices. You would be able to keep the main device connected via Wi-Fi at all times and allow other devices to connect via Bluetooth when required. This is great if you are having a party or have friends round and they want to connect to the amplifier. As well as the Wi-Fi and Bluetooth wireless connections, this wall amplifier has a hard-wired auxiliary input. Perfect if you'd like a hardwired connection to your TV. As well as an aux input, it also accepts Micro SD cards. Range If you are connected via Bluetooth, the range is around 10 meters. If You are using Wi-Fi, you will be able to control this amplifier as long as you have a connection to the internet, no matter the range. App Control This amplifier has its own (FREE) Phone / Tablet app that allows you to link your Spotify / Amazon Music / Apple Music / Digital Radio all through one simple app. App is Compatible with ANDROID and iOS Multi-Room / Zoning The clever app allows you to set-up and control multiple amplifiers from a single device (app). This is perfect for multi-room / multi-zone applications where you would like to control the volume of each system separately / combine zones into 1, all from your phone / tablet. Depending on the level of music streaming service you use, you can also play different things in different zones at the same time and control all volumes separately. This is an incredibly versatile piece of kit and a fantastic alternative to SONOS. Power The amplifier may be small, but it packs a punch, at peak, this small unit will pump out an impressive 100W max @ 4 Ohm (2x 50W). However, thanks to the latest, CLASS-D DIGITAL sound reproduction technology, this little stereo amplifier sounds much louder than the figures suggest It really is impressive! The amp can handle any domestic environment and most commercial environments (depending on the nature of the install). Size Our most compact amplifier yet, this incredibly clever unit can be recess or surface mounted to a wall using a 47mm back box. The bezel has an extremely slim design and will only protrude 10mm once installed. Amplifier Features: 1x Wi-Fi Module 1x Auxiliary Input Screw Terminals 1x MicroSD Card Slot 4x Screw Terminals for connecting speaker cable Wired Connections: Screw Fit Speaker Terminals: Labelled; (R- and R+) for negative and positive connections to the right speaker(s), (L- and L+) for negative and positive connections to the left speaker(s). Screw Fit Auxiliary Input: For a direct wired connection to a source device such as a smartphone. Micro SD Card: The amplifier can also play MP3 tracks stored on a Micro SD Card. Simply insert card at the bottom of the panel. Amplifier Technical Specification : Output Impedance: 4-8 Ohms Output Power RMS: 2 x 30W @ 8 Ohms (60W) Output Power RMS: 2 x 50W @ 4 Ohms (100W) Output Power MAX: 2 x 40W @ 8 Ohms (80W) Output Power MAX: 2 x 70W @ 4 Ohms (140W) Operating Voltage: 90 220V AC Frequency Response: 20Hz to 20 KHz Dimensions (HxWxD): 86x86x53mm WEIGHT: 190g Speakers Technical Specification : 13cm / 5 Inch 5cm (2 Inch) Tweet with Mylar Cone Woofer with Polypropylene cone 6mm Spade terminal connectors Built-In Crossover All Fixings supplied. 2-Way Speakers Max Power80w Power RMS40w Frequency Response80Hz-18kHz Impedance8 Ohms Moisture resistant Dual Cone Speaker 130mm diameter, for fitting to a 114mm cut-out / Depth65mm HOW TO INSTALL: 1)Run all of the cables you need to run before starting the install, this includes mains power cables, speaker cables and any other audio cables (for AUX ports). PLEASE ENSURE THAT ELECTRICITY IS TURNED OFF WHEN INSTALLING. 2)You now need to prepare your wall for the amplifier to be mounted, you will need to cut a hole for this to be recess mounted or use a surface mounted back box (please see Supplied instruction manual for full details). 3)Wire the mains power cable and speaker cables to rear of the amplifier via the screw terminal connections. Connect the other end of the speaker cables to the speakers ensuring that you wire positive to positive and negative to negative. 4)You can now power up the unit, select a source and listen to your chosen music. BLUETOOTH: Simply turn Bluetooth on, on your device (make sure your device is visible under its Bluetooth settings). Then search for compatible devices and your device (phone for example) will find the amplifier. Follow the instructions given to you and you will then be able to play your music wirelessly. Wi-Fi: 1) On your smartphone /
Best current price£109.47from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£109.47Visit shop ›100W Bluetooth Wall Mounted Amplifier & 4X 80W Stereo Ceiling Speaker Kit White 5056581965462
Visit shop ›