Shopping.co.uk

Wessex Electrical 20A DP Switch - Antique Brass

Wessex Electrical 20A DP Switch - Antique Brass

Stylish 1‑gang 20A DP switch with neon indicator in antique brass—perfect for safely isolating hig...

Best current price£8.30from B&Q

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £8.30

View price history by clicking the chart icon.

B&QB&Q - Windsor 1G 20Amp D.p Switch Antique Brass
Free delivery in 1–3 days
£8.30
Visit shop

Product Information

Full details

This Wessex Electrical 20A DP switch in antique brass is designed for homeowners and electricians seeking a stylish and safe way to isolate high-load appliances. Its key benefit is providing reliable, visible power control with a vintage aesthetic. A potential caveat is its specific amperage rating, requiring confirmation for suitability with your appliance. This 1-gang Double Pole (DP) switch features a neon indicator for clear status indication and comes with a rear gasket for enhanced protection.

All features

ColourGold
Model Part NumberW37AB
BrandWessex Electrical

Extended Product Information

FAQs

What is the amperage rating of this switch?

This switch is rated for 20 Amperes (20A).

What is the advantage of a Double Pole (DP) switch?

A Double Pole switch disconnects both the live and neutral conductors simultaneously, offering a higher level of safety for isolating appliances.

Can I use this switch for any appliance?

It is suitable for high-load appliances up to 20A. Always check the power requirements of your appliance to ensure it does not exceed this rating.

Does the neon indicator stay on all the time?

The neon indicator is typically designed to illuminate when the switch is in the 'on' position, indicating that power is being supplied to the appliance.

How should I clean the antique brass finish?

Use a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.

Is this switch suitable for outdoor use?

The switch includes a rear gasket for added protection, but it is primarily designed for indoor use. Check specific environmental ratings if intended for exposed locations.

Who should install this switch?

Installation should only be carried out by a qualified electrician in accordance with current safety standards and regulations.

Troubleshooting

Neon indicator not lighting up

Ensure the switch is in the 'on' position and that the appliance is connected and drawing power. If the issue persists, check wiring connections or consult a qualified electrician.

Switch feels stiff or difficult to operate

Verify that the switch is correctly installed and not overtightened in the back box. Ensure no debris is obstructing the mechanism. If the problem continues, the switch may be faulty and require replacement by an electrician.

Appliance not receiving power when switch is 'on'

Check that the switch is fully engaged. Verify the incoming power supply is live. Inspect the wiring connections to the switch terminals for looseness or damage. Consult an electrician if the issue is not resolved.

Pros and Cons

Pros

  • Provides secure isolation for high-power devices.
  • Stylish antique brass finish enhances interior aesthetics.
  • Neon indicator offers clear visual status of power.
  • Durable build quality for long-term use.
  • Includes a gasket for added protection.

Cons

  • Limited to 20A, not suitable for exceptionally high-load appliances exceeding this rating.
  • Antique brass finish may require specific cleaning methods to maintain appearance.
  • Single-gang design means it's not for controlling multiple circuits independently.
  • Neon indicator consumes a small amount of power when 'on'.

Setup, Compatibility & Care Instructions

Setup:

This switch is designed for standard UK electrical wiring systems. Installation should only be performed by a qualified electrician in accordance with current wiring regulations (BS 7671).

  1. Ensure the main power supply is completely isolated before commencing any work.
  2. Carefully connect the live and neutral wires from the appliance and the power source to the appropriate terminals on the double pole switch.
  3. Secure the switch to the back box using the provided screws.
  4. Attach the faceplate.
  5. Restore power and test the switch functionality and neon indicator.

Compatibility:

This switch is rated for 20A and is suitable for high-load appliances. It is compatible with standard UK single-gang back boxes. Always confirm the total load of the appliance does not exceed the switch's 20A rating.

Care:

To maintain the appearance of the antique brass finish:

  • Wipe clean with a soft, dry or slightly damp cloth.
  • Avoid using abrasive cleaners, polishes, or solvents, as these can damage the finish.
  • Regular dusting will help prevent build-up.

Similar items

Fuse Spur - Bronze - W39ABFrom £14Wessex Electrical Light Switch - 1 Gang 2 Way - Antique BrassFrom £10Wessex Electrical Fuse Spur 13A Switched - Antique BrassFrom £12Click Scolmore Fused Connection Unit - BlackFrom £10Wessex Electrical Switch - SilverFrom £8Wessex Electrical 13A DP Socket - Antique BrassFrom £11Wessex Electrical Cooker Switch & Socket - Antique BrassFrom £18Wessex Electrical Fused Spur 13A Switched - BlackFrom £13MK Metal Clad 13A DP Switched Connection Unit With Neon - SilverFrom £28Wessex Electrical Switch - Brushed Stainless Steel - SilverFrom £9MK Metal Clad 13A DP Switched Connection Unit With Flex Outlet - SilverFrom £26Wessex Electrical Socket - SilverFrom £10

Price History

DatePrice
Visit shop