NGK Spark Plug Iridium - 7994

IFR5E11 NGK Spark Plugs Spark Plug (Single) 7994 NGK IFR5E11 18814-25000 MD361067 SAB330DE8640\n\n...

Best current price£15.38from The Green Spark Plug Company

All Offers

11 offers from £15.38 - £61.71

View price history by clicking the chart icon.

The Green Spark Plug CompanyNgk Ifr5e11 7994 Spark Plug Iridium New Ngk-Ifr5e11
£4.16 delivery
£15.38
Visit shop
eBayNGK 7994 Spark Plug for MITSUBISHI,SUZUKI
£5.90 delivery
£18.12
Visit shop

Product Information

Full details

The NGK Spark Plug Iridium - 7994 is designed for vehicle owners seeking improved ignition performance and engine efficiency. Its key benefit lies in the durable iridium material which promotes a strong, consistent spark for better combustion. A potential caveat is ensuring compatibility with your specific vehicle's make and model before purchase, as spark plugs are critical ignition components.

All features

Model Part Number7994
BrandNGK

Extended Product Information

FAQs

How often should I replace my spark plugs?

Replacement intervals vary significantly by vehicle and spark plug type. Iridium spark plugs generally last longer than conventional ones. Consult your vehicle's owner's manual for the recommended maintenance schedule.

Can I use these NGK spark plugs on any vehicle?

No, you must verify compatibility with your specific vehicle's make, model, and engine. Using the wrong spark plug can cause damage and poor performance.

What does 'Iridium' mean for a spark plug?

Iridium is a very hard and durable precious metal used for the center electrode. It allows for a smaller electrode tip, which requires less voltage to spark and provides a stronger, more focused spark, leading to better combustion and longevity.

Do I need to gap iridium spark plugs?

Most NGK iridium spark plugs are pre-gapped from the factory for their intended application and should not be re-gapped, as doing so can damage the fine iridium tip. Always check the product packaging or vehicle specifications.

What is the difference between this spark plug and a standard one?

The primary difference is the material of the center electrode. Iridium plugs use a fine-tipped iridium electrode, offering superior durability, ignitability, and a longer lifespan compared to standard copper or platinum plugs.

What do the numbers and letters (IFR5E11, 7994) mean?

These are NGK's specific codes. 'IFR' indicates a projected insulator tip with a resistor and an iridium center electrode. The numbers relate to thread size, hex size, reach, and other specifications. '7994' is the specific part number for this configuration.

Troubleshooting

Engine misfires or runs rough after installation

Ensure spark plug wires or coil packs are securely connected. Verify the correct spark plug gap if adjustable (though iridium plugs are often pre-gapped). Confirm the correct spark plug model was installed.

Difficulty starting the engine

Check all electrical connections to the ignition system. Ensure the correct spark plugs were installed and are functioning properly. A faulty ignition coil could also be the cause.

Check Engine Light illuminates

This could indicate a misfire or other ignition system fault. Scan the vehicle's OBD-II codes for specific information. Ensure plugs are correctly torqued and connections are secure.

Pros and Cons

Pros

  • Enhanced ignition performance for smoother engine operation.
  • Improved fuel efficiency due to more complete combustion.
  • Longer service life compared to conventional spark plugs.
  • Consistent spark generation even under demanding conditions.

Cons

  • Requires careful verification of vehicle compatibility.
  • Higher initial cost compared to standard spark plugs.
  • Installation requires specific torque settings to avoid damage.

Setup, Compatibility & Care

Compatibility: Before installation, it is crucial to verify that the NGK Spark Plug Iridium - 7994 (MPN: 7994, Part Number: IFR5E11) is listed as compatible with your vehicle's make, model, and year. Consult your vehicle's owner's manual or a qualified mechanic. Cross-reference part numbers like NGK 7994, 18814-25000, or MD361067 with your vehicle's specifications.

Installation:

  1. Ensure the engine is cool to prevent burns and ensure proper torque.
  2. Carefully remove the old spark plug using an appropriate spark plug socket.
  3. Inspect the new spark plug for any damage before installation.
  4. Thread the new spark plug in by hand to avoid cross-threading.
  5. Use a torque wrench to tighten the spark plug to the manufacturer's specified torque. Over-tightening can damage the cylinder head, while under-tightening can lead to leaks.
  6. Reconnect the spark plug wire or coil pack securely.

Care: Spark plugs are maintenance items and are not designed for cleaning and reuse in the same way as some other parts. Once removed, they are typically replaced. If a spark plug is removed for inspection and appears to be in good condition, it can be reinstalled, but it's often recommended to replace them as a set during routine maintenance intervals specified by your vehicle manufacturer.

Price History

DatePrice
Visit shop