Best current price£52.00from eBay
Shopping.co.uk recommended and popular offers
eBay£52.00Visit shop F BALL F41 Carpet Tile Tackifier 5 Litre
Visit shop
Amazon£71.75Visit shop F BALL Stopgap P141 Primer 5 Litre
Visit shop6 offers from £52.00 - £148.00
View price history by clicking the chart icon.
The F Ball Stopgap P141 is an essential high-performance acrylic primer designed for professional flooring installers and DIYers preparing non-absorbent subfloors for levelling compounds. Its primary benefit is the creation of a high-grip, textured surface that significantly enhances the mechanical bond between the subfloor and the smoothing compound, though users should be aware it requires a proper drying period of 1-2 hours before the next step can begin.
| Colour | Yellow |
|---|---|
| Model Part Number | P141 |
| Brand | F Ball |
P141 is specifically designed for non-absorbent surfaces; for porous concrete, a more standard primer may be more appropriate.
No, Stopgap P141 should be used neat, directly from the container.
It is specifically recommended for use with Stopgap levelling compounds, particularly Stopgap 600.
It is best to avoid foot traffic on the primed area until it has completely dried to prevent contamination.
Use a medium-pile roller for large flat areas and a brush to cut in around walls and obstacles.
The product should be stored in a cool, dry place above 5 degrees Celsius to prevent damage.
High humidity or low temperatures may slow the drying process; allow additional time and ensure adequate airflow.
Ensure the product is stirred thoroughly before application to keep the uPVC particles suspended evenly.
Wash brushes and rollers immediately with warm soapy water before the acrylic binder sets.
Before starting, ensure the substrate is structurally sound, clean, and dry. Stir the product well before application to ensure the uPVC particles are evenly distributed throughout the solution. Apply with a brush or roller in a thin, even coat. Avoid leaving puddles of primer, as excess material can hinder the drying process. Once dry, the floor should be protected from heavy traffic until the smoothing compound is applied. Clean all brushes and rollers with water immediately after use, as the product is designed to resist water once fully cured.
