Best current price£18.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£18.99Visit shop K&B Panels 3D Wall Panel, Rustic Brick Effect Styrofoam Wall Panelling, Lightweight, Easy to Install, Dual Insulation to Reduce Acoustic Noise, Indoor & Outdoor (Rustic Urban Orange) (1 Panel)
Visit shop3 offers from £18.99 - £20.99
View price history by clicking the chart icon.
The K&B Panels 3D decorative wall panels are designed for DIY enthusiasts and homeowners looking to quickly and affordably update interior or exterior walls. Offering a realistic 3D texture in various effects like brick or slate, they provide an instant aesthetic upgrade with the significant benefit of easy installation and dual insulation. A key consideration is that while paintable, the finish will depend on the quality of paint and application.
| Model Part Number | Kb Panels |
|---|---|
| Brand | KnB Panels |
The panels can be installed on most interior and exterior surfaces, including drywall, plaster, concrete, and wood, provided the surface is clean, dry, and structurally sound.
No, specialized tools are not required. You will need a sharp utility knife for cutting and a suitable foam adhesive. Gloves are recommended for handling adhesive.
Clean the panels with a soft, damp cloth. Avoid abrasive cleaners. For tougher stains, use a mild soap solution and rinse with a damp cloth.
Yes, they are moisture-resistant and can be used in bathrooms and kitchens. For areas with direct water splash, sealing with a weather-resistant varnish is recommended.
Each pack contains 10 panels, each measuring 100 × 50cm, covering a total area of 5 square meters.
Yes, the panels offer dual insulation, providing both thermal and sound dampening properties.
Yes, the panels are paintable. It is recommended to use a primer suitable for foam or plastic surfaces before applying your chosen paint for best results.
Ensure the wall surface is clean, dry, and properly prepared. Verify that the correct type of foam adhesive is being used and applied generously according to the manufacturer's instructions. Press panels firmly after application.
Use a very sharp utility knife or a fine-toothed saw. Make multiple shallow passes rather than one deep cut. A straight edge or guide can help ensure straight cuts.
Ensure you are using a 'low-expansion' foam adhesive specifically designed for EPS or similar materials. Do not over-apply the adhesive; use only the recommended amount.
Prime the panels with a suitable primer for plastic or foam surfaces before painting. Use a good quality paint and apply multiple thin coats rather than one thick coat.
Setup:
Compatibility:
These panels are compatible with a variety of interior and exterior wall surfaces, including drywall, plaster, concrete, and wood. Ensure the surface is sound and prepared.
Care:
Clean the panels with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the coating. For stubborn marks, a mild soap solution can be used, followed by rinsing with a damp cloth.
