Toolless CAT5e In-line Coupler - Lindy - 60174
Best current price£5.94from www.lindy.co.uk
Best offers
Shopping.co.uk recommended and popular offers
www.lindy.co.uk£5.94Visit shop Toolless CAT5e In-line Coupler
Visit shopwww.lindy.co.uk£5.94Visit shop All Offers
5 offers from £5.94 - £11.45
View price history by clicking the chart icon.
Product Information
Full details
The Lindy Toolless CAT5e In-line Coupler (60174) is designed for network professionals and DIY enthusiasts who need to extend or repair existing CAT5e or CAT6 network cables without specialized tools. Its primary benefit is the quick, toolless connection system, simplifying installations. A minor caveat is its specific compatibility with 22-26 AWG CAT6 cable, though it also works with 110 and Krone punch down tools. This coupler allows for seamless in-line connections, ensuring network continuity.
All features
| Model Part Number | 60174 |
|---|---|
| Brand | Lindy |
Extended Product Information
FAQs
What type of cable is this coupler designed for?
This coupler is designed for use with 22-26 AWG CAT6 cable. It can also be used with 110 and Krone punch down tools.
Do I need any special tools to install this coupler?
No, the primary feature is its 'toolless' push-down connectors, meaning you don't need a separate punch-down tool for basic installation. However, it is compatible with 110 and Krone punch-down tools if you prefer to use them.
Can I use this coupler with CAT5e cables?
While the product is named 'CAT5e In-line Coupler', its specifications mention support for 22-26 AWG CAT6 cable. It should work for CAT5e as well, provided the cable meets the AWG requirements and the wiring scheme is consistent.
What is the warranty period for this product?
The Lindy Toolless CAT5e In-line Coupler comes with a 2-year warranty.
What are the dimensions of the coupler?
Specific dimensions are not provided in the product information, but it is designed as a standard in-line coupler for Ethernet cables.
Can this coupler be used outdoors?
The operating temperature is -40 to 70 °C, which is broad. However, it is not rated for outdoor environmental protection (like water or dust ingress), so it's best used in protected indoor environments.
Will this coupler affect my network speed?
When installed correctly with compatible cable and wiring standards, this coupler should maintain the performance of your network. Poor installation or incompatible cable can lead to speed degradation or connection issues.
Troubleshooting
Network connection not working after using the coupler
Verify that both ends of the coupler were wired using the same T568A or T568B standard. Ensure all wires are fully seated and the connector levers are locked. Check the cable ends for damage before insertion. Use a network cable tester to confirm continuity.
Slow network speeds or intermittent connection
Ensure the cable gauge is within the supported range (22-26 AWG CAT6). Check that the wires are making solid contact within the connector slots and that no individual wires are broken or shorted. Re-terminate the connections if necessary.
Connector lever is difficult to press down
Ensure the cable's conductor wires are stripped cleanly and not frayed. Check for any obstructions in the connector slot. Make sure the wire is properly aligned within the slot before pressing.
Pros and Cons
Pros
- Toolless installation saves time and reduces the need for specialized tools.
- Supports standard network cable gauges (22-26 AWG CAT6).
- Flexible compatibility with 110 and Krone punch-down tools.
- Extends network cable lengths easily.
- Professional and clean white finish.
Cons
- Primarily designed for CAT6 cable; performance with other categories may vary.
- May require more force to push down wires compared to a manual punch-down tool.
- Images are for demonstration; actual product appearance may differ slightly.
- Not suitable for terminating into wall plates or patch panels directly.
Setup, Compatibility & Care
Setup:
- Prepare the ends of the two network cables you wish to join. Strip approximately 1 inch of the outer jacket from each cable end.
- Untwist the pairs of wires slightly and arrange them according to the standard T568A or T568B wiring scheme (ensure both ends use the same scheme).
- Insert the wires into the corresponding slots on the coupler's push-down connectors. Ensure each wire is seated correctly.
- Firmly press down on the connector levers until they click into place, securing the wires.
- Test the connection using a network cable tester.
Compatibility:
- Supports 22-26 AWG CAT6 cable.
- Can also be used with 110 and Krone punch-down tools if preferred.
- Designed for in-line connections between two RJ45 terminated cables.
Care:
- Keep the coupler clean and dry. Avoid exposure to excessive dust or moisture.
- Periodically check connections for any signs of damage or wear, especially if the cable is frequently moved.
- Clean the exterior with a dry or slightly damp cloth. Do not use abrasive cleaners.