Non-Adjustable Black Solar-Powered Led Pir With Motion Sensor Outdoor Wall Light - B&Q - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This solar-powered LED wall light from B&Q is designed for homeowners seeking an easy-to-install, energy-efficient lighting solution for areas without direct electrical access. Its key benefit is hassle-free installation and operation powered by the sun, ideal for illuminating facades and entrances. A potential caveat is its reliance on sufficient sunlight for optimal charging and performance, which may vary by location and season.
All features
| Colour | Black |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
How long does the battery last on a full charge?
The duration the light stays on depends on the amount of sunlight it receives during the day. Typically, a full charge can provide several hours of illumination, with the motion sensor extending its effective use throughout the night.
What is the range of the motion sensor?
The specific range can vary, but motion-activated solar lights generally detect movement within a radius of approximately 5-8 meters (15-25 feet), depending on the model and installation height.
Do I need to turn the light on manually?
No, this light is designed for automatic operation. It charges during the day and activates via the motion sensor when darkness falls and movement is detected.
Can this light be used in rainy or wet conditions?
Yes, this outdoor wall light is designed to withstand various weather conditions. However, prolonged heavy rain or submersion should be avoided.
How often should I clean the solar panel?
It is recommended to clean the solar panel periodically, ideally every few months or whenever visibly dirty, using a soft, damp cloth. This ensures optimal charging efficiency.
What happens during winter months?
During winter, with shorter daylight hours and less direct sunlight, the solar panel may not charge as effectively. This can result in reduced brightness or shorter operating times compared to summer months.
Troubleshooting
Light does not turn on at night.
Ensure the solar panel is receiving direct sunlight for at least 6-8 hours per day. Check that the solar panel and motion sensor are clean. Verify that the location is dark enough for the light to activate (it may not work in ambient light).
Light does not stay on for long.
The battery may not be fully charging. Clean the solar panel and ensure it gets maximum sun exposure. In winter or during prolonged cloudy periods, the charge may be less efficient, leading to shorter run times.
Motion sensor is not activating the light.
Clean the PIR sensor lens. Ensure there are no obstructions blocking the sensor's view. Check if the ambient light level is low enough for the sensor to trigger.
Light turns on during the day.
The light should only activate in darkness. If it is activating during daylight, there might be an issue with the light sensor. Ensure the solar panel is not covered or in a location with inconsistent light levels that might be confusing the sensor.
Pros and Cons
Pros
- Environmentally friendly with solar power
- Easy installation without electrical expertise
- Cost-effective with no running electricity costs
- Automatic activation via motion sensor enhances security
- Suitable for locations without existing power supply
Cons
- Performance depends on sunlight availability
- Light output may not be adjustable
- Initial placement critical for optimal charging
- Motion sensor range may be limited
Setup, Compatibility & Care
Setup:
- Choose Location: Select a spot that receives direct sunlight for the majority of the day, free from obstructions like trees or overhangs. For optimal charging, aim for a south-facing orientation where possible.
- Mounting: Securely attach the light to the wall using appropriate screws and wall plugs for your wall type. Ensure the mounting is firm and stable.
- Initial Charge: Allow the light to charge in direct sunlight for at least 1-2 full days before the first use to ensure the battery is fully conditioned.
- Operation: The light is designed to operate automatically. It will charge during the day and activate its motion sensor at night.
Compatibility:
- This light is designed for outdoor use and is compatible with most standard exterior wall surfaces.
- It does not require any electrical wiring, making it universally compatible with any home exterior.
Care:
- Cleaning: Periodically wipe the solar panel clean with a soft, damp cloth to remove dust and debris. This ensures maximum efficiency in solar absorption. Avoid abrasive cleaners.
- Battery Maintenance: The internal battery is rechargeable. Over time, like all rechargeable batteries, its capacity may reduce. Generally, these lights are designed for long-term use without user-replaceable batteries.
- Sensor Check: Ensure the motion sensor lens is kept clean and free from cobwebs or dirt.