Polypipe Waste SC125 Solvent Cement - 125ml

This solvent cement is designed for use with non-pressure PVC and ABS pipes and conduits.

Hold the pipe and fitting together firmly for 15-30 seconds after application.

Allow the joint to cure fully, typically for about 24 hours, before applying pressure or testing the system. Refer to the product label for specific recommendations.

Store the solvent cement in a cool, dry place and ensure the container is tightly closed.

No, this solvent cement is not suitable for use with pressure pipes.

If the solvent cement comes into contact with your skin, wash the affected area immediately with soap and water.

Ensure the pipe and fitting surfaces were clean before application. Re-apply cement and reassemble, holding firmly for the recommended time. Check for cracks in the pipes.

Ensure the product has been stored correctly. If the product is old, it may have thickened. Ensure surfaces are clean before applying.