Matrix XTR600 Elite Pro - 13.0m

The X-Graphene resin contributes to the pole's strength and responsiveness, allowing for a lighter yet more powerful rod.

No, Matrix Revolve side pullers are fitted on most kits, but they are not included on the finesse kits.

The Glide tape finish requires minimal maintenance. Simply wipe the sections clean with a damp cloth after use. Avoid abrasive materials.

The weight of the pole at 13 meters is 885g.

Yes, the pole's construction with Japanese carbon fibre and MST layering technology makes it suitable for handling larger fish, though appropriate elastication is crucial.

The Euro Package includes the 13m XTR600 Elite Pro Pole, 4x Pro match kits (one fitted), 4x Finesse kits, 3x No.3 sections, 3x No.4 sections, a Twist lock extending cupping kit, a Groundbait cup set, a Mini extension, and a Duralite pole case.

After fishing, wipe down each section with a soft, damp cloth. Ensure joints are clean and dry before storing to prevent issues.

Ensure all joints are clean and free from grit or debris. Check for any damage to the carbon weaved joint protectors. Apply a small amount of silicone grease to the male end of the joint if necessary, wiping away any excess.

Adjust the elastic tension. If using a side puller, ensure it is positioned correctly and the elastic is running freely through it. Refer to elastication guides for appropriate tension based on target species.

Confirm all sections are fully pushed together and the SLG joints are engaged properly. Ensure you are using the correct sections for the desired length (e.g., not over-extending with an unnecessary section). Check that the MST layering technology is intact.

Ensure the pole sections are clean. In low light conditions, use a headlamp or flashlight to illuminate the markings. The markers are designed for clarity in standard daylight conditions.